Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Orlando Owner’s Guide
We stock and install Tamko-compatible driveway and paver materials across Orlando, with typical installed paver driveway work running $7,000 – $18,000 depending on square footage, base depth, and the specific Tamko product line you’re matching. If you’re reading this because a section of your Tamko driveway is sinking, cracking, or separating at the seams, you’re in the right place. Most Orlando homeowners discover a failed paver section the same way: a low spot forms after heavy rain, a row of pavers shifts out of line, or the sand jointing washes out and the whole thing starts to feel loose underfoot.
We’re an independent Orlando contractor, not affiliated with Tamko directly, but we work with their paver and driveway product lines regularly and know what holds up in Central Florida’s heat, humidity, and afternoon downpours.
Which Tamko Models This Applies To
Tamko’s paver line spans several product families, and the compatibility question matters more than most homeowners expect. The two you’ll most likely have in an Orlando driveway are the Tamko Heritage Pro series (a tumbled-edge concrete paver, typically 4″ x 8″ or 6″ x 9″ formats) and the Tamko CastleStone line, which runs larger format and is more common on patios and pool decks than driveways. Before ordering replacement pavers, flip one up and check the underside. Tamko stamps most of their pavers with a plant code and sometimes a run date. That code is what determines whether a new batch will be a true color match or close enough that only you’ll notice.
Here’s the gotcha that trips up a lot of Central Florida homeowners: Tamko changes color blends slightly between manufacturing runs. If your driveway was poured in 2018 and you order replacements now, the base gray or tan won’t be identical. We pull from multiple local Orlando suppliers and dry-lay samples before committing, so you see the match in daylight on your actual driveway, not under a showroom light. For OEM replacements, you’re looking at the exact same paver, batch permitting. A quality aftermarket equivalent from Belgard or Unilock can work in many driveway sections, but the edge profile and height tolerance differ by a few millimeters, which matters more than you’d think when you’re resetting a 20-foot run.
Styles & brands we work with
Signs Your Tamko Driveway & Pavers Is Failing
- Water pooling in the same spot after every rain. This means the base below that section has settled or washed out. In Orlando’s sandy soil, a heavy storm can erode a base faster than most people realize, especially around downspouts and driveway edges.
- Pavers rocking or shifting underfoot. Individual pavers moving means the sand jointing between them is gone or the edge restraint has failed. Once one row starts walking, the neighbors follow within months.
- Efflorescence that won’t stop coming back. That white chalky film on the paver surface is salt being pushed up by moisture. It’s common after humid Florida summers, but persistent cases point to a drainage issue under the pavers, not just surface staining.
- Cracks running through multiple pavers in a line. A cracked paver is a paver problem. A crack that jumps across four or five pavers in a straight line is a base or structural problem, and swapping the broken pieces won’t fix it.
- Edges spreading outward. The outside rows of a paver driveway rely on a hidden edge restraint (usually plastic or aluminum) to hold everything in compression. When that restraint fails, the whole field starts to yawn open along the border.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Orlando homeowners, a targeted paver repair (replacing 20 to 50 pavers and re-sanding the affected area) usually runs $800 – $2,500 with materials and labor. A full paver driveway installation starts at $7,000 and can reach $18,000 for larger homes in neighborhoods like College Park or Winter Park, where driveways run wider and deeper. The range comes down to three things: how many square feet you have, what condition your existing base is in, and whether we’re matching an existing Tamko paver or starting fresh with a new product line.
Every quote we give in Orlando is a written number before any work starts. That number includes removing the failed section, rebuilding the base to the correct depth, reinstalling pavers, fresh polymeric sand, and hauling away the old material. If the repair fails within a year, the 365-Day Done Right Promise means we come back and make it right at no charge, in writing, on every job.
DIY or Call Us?
You can absolutely reset a handful of loose pavers on your own if the issue is localized. Pull up the affected pieces, check that the sand base is still there, re-level, tap them back in with a rubber mallet, and sweep joint sand into the gaps. That’s a Saturday morning job. What you shouldn’t DIY is a section that’s sunken more than an inch, any area where water is actively pooling, or a run of pavers where the edge restraint has let go. Once the base fails, adding sand on top just buries the problem and makes the professional repair more expensive later.
If you’re not sure which category you’re in, call us at (850) 427-6454. We’ll walk through what you’re seeing and tell you honestly whether it’s a bucket of sand or a base rebuild. Give you the number first, then pick up the tool.
FAQs
A properly installed Tamko paver driveway in Orlando typically lasts 20 to 30 years, but the base below it fails long before the pavers themselves wear out. Florida’s sandy soil and heavy storm cycles put constant stress on the base layer, which is why we rebuild bases to spec on every repair rather than just dressing the surface.
Call (850) 427-6454 if you want us to check your base condition, estimates are free.
A cracked paver can’t be glued back together in a way that survives driveway traffic, so replacement is the only real fix for individual broken pieces. The good news is that single-paver swaps are usually quick and inexpensive, assuming we can source a close color match from current Orlando supplier stock.
Send us a photo or call (850) 427-6454 and we’ll tell you if it’s a one-paver fix or something larger.
A standard paver section repair (removing the failed area, rebuilding the base, reinstalling, and re-sanding) takes one to two days for most Orlando driveways. Full paver driveway installations run three to five working days depending on square footage and how much of the old surface has to come out first.
Call (850) 427-6454 and we’ll give you a real arrival window and a written timeline with your quote.
We keep common Tamko paver sizes and colors sourced through Orlando suppliers for quick repairs, but exact batch matches for older driveways usually need to be ordered. We pull samples and dry-lay them on your driveway before installing so you can see the real color in natural light, not a catalog photo.
Call (850) 427-6454 and we’ll check current stock for your specific Tamko product line.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
