Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Orlando Owner’s Guide
PGT fence installation in Orlando typically runs $3,500 – $9,000 for a complete vinyl fence system, depending on linear footage, gate hardware, and whether we’re replacing an existing fence or starting from scratch. We stock PGT-compatible fence panels, posts, and gate hardware on the truck for most Orlando calls, and we can usually schedule installation within the week. Most Orlando homeowners discover they need this work when a storm pushes a fence section over, a gate starts dragging, or a post cracks at the base from years of Florida moisture and heat.
Here’s what we see most often in Orlando neighborhoods like College Park, Winter Park, and Dr. Phillips: the fence itself is fine, but the posts weren’t set deep enough or the concrete footings weren’t poured wide enough to hold up to our afternoon thunderstorms. Trevor Nash has walked enough older Orlando properties to know what 40 years of sandy soil and humidity does to a fence line. If you’re looking at a leaning section or a gate that won’t latch, you’re in the right place.
Key Takeaways
- PGT fence installation in Orlando typically costs $3,500 – $9,000 installed.
- We’re an independent Orlando contractor, not affiliated with PGT, but we install and stock PGT-compatible fence components.
- Every job gets a written price before work starts and our 365-Day Done Right Promise in writing.
- Call (850) 427-6454 for a free estimate on PGT fence installation in Orlando.
Which PGT Models This Applies To
PGT’s fence line covers a few distinct product families, and the right fence installation approach depends on which one you have. The PGT vinyl fence series includes privacy fences (solid panels, typically 6′ tall), semi-privacy (spaced pickets), and picket-style fences (usually 3′ – 4′ for front yards). PGT also manufactures aluminum fence systems, which are a different animal entirely: lighter, rust-resistant, but harder to repair when a panel gets bent.
The compatibility gotcha we see in Orlando: PGT vinyl fence posts are sized for a specific panel thickness. If you’re replacing a single panel on an older PGT fence, measure the panel thickness and the post opening before you buy anything. PGT changed panel dimensions on some lines around 2018, and a new panel will not seat correctly in an older post. For aluminum fences, PGT uses a specific post-to-rail bracket system that doesn’t accept universal hardware from the big-box stores. We keep both the current-spec and the older-spec PGT-compatible parts in our Orlando inventory, so when we show up, the part fits the first time.
If you have an OEM PGT part and the fence is still under PGT’s manufacturer warranty, we’ll tell you that plainly and recommend you file a claim before paying for a replacement. If the fence is out of warranty, we source PGT-compatible aftermarket components that meet or exceed the original spec, at a lower cost than dealer-direct pricing.
Styles & brands we work with
Signs Your PGT Fence Installation Is Failing
- Posts leaning or pulling out of the ground. This is the number one failure we see in Orlando, especially after a wet season. The original installer set the posts in concrete that didn’t go below the frost line or didn’t extend wide enough around the post base. In sandy Central Florida soil, a post needs to be set 2 – 3 feet deep with a full concrete collar, or it will eventually lean.
- Gate drags or won’t latch. Normally this is a sagging hinge or a post that’s shifted, not a broken panel. We often fix this by re-seating the hinge post and re-hanging the gate, which is a far cheaper repair than a full fence replacement.
- Cracked or split vinyl pickets. Florida UV exposure degrades vinyl over time. PGT uses UV-stabilized vinyl, but after a decade of direct Orlando sun, panels can get brittle. You’ll see small stress cracks along the top rail or the picket edges.
- Mold, mildew, or black streaks on the panels. Our humidity is brutal on any fence. This is normally cosmetic, not structural. A soft wash with a bleach solution usually clears it. If the panels are warping in addition to staining, the structural integrity is compromised and replacement is the better call.
- Aluminum rails pop out of the post brackets. On PGT aluminum fences, the rails are held with spring-loaded brackets. Over time, those springs corrode in Florida’s salt air, especially if you’re within a few miles of the coast. The fix is new brackets, not a new fence.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, PGT fence installation runs $3,500 – $9,000 for a typical residential project. The main cost drivers are linear footage (a 100-foot backyard fence is a very different price from a 200-foot full-perimeter fence), fence height (6′ privacy costs more than 4′ picket), number of gates, and whether we’re removing and hauling away an old fence.
Here’s how that range breaks down in Orlando, based on what we’ve installed across the area:
- Small backyard fence (approx. 75 linear feet, one gate): $3,500 – $5,000
- Average residential fence (approx. 150 linear feet, two gates): $5,000 – $7,000
- Large or full-perimeter fence (200+ linear feet, multiple gates, removal of old fence): $7,000 – $9,000
Every PGT fence installation we do in Orlando includes the written price up front, the written 365-Day Done Right Promise, removal and disposal of the old fence if needed, post-hole digging, concrete setting, panel installation, gate hardware, and a final walkthrough. If something fails inside the guarantee period, we come back and fix it at no charge. That’s the Penhallow standard, and it’s in writing before the first post goes into the ground.
DIY or Call Us?
Fence installation is one of the more tempting DIY projects, and for a small picket fence on flat ground, a capable Orlando homeowner can absolutely do it. The part most people get wrong is the post setting: digging deep enough, adding gravel drainage at the bottom of the hole, and pouring enough concrete to keep the post from moving in Florida’s shifting sandy soil. Get the post depth wrong and you’ll be redoing the whole fence in three years.
The other thing to know: PGT vinyl panels are heavy. A 6′ privacy panel can weigh 40 – 50 pounds, and setting one level into a post while holding it square is a two-person job at minimum. Gates add another layer of complexity. If any of that gives you pause, call us at (850) 427-6454. We’ll walk you through the honest math: what it costs, what it takes, and whether DIY makes sense for your specific fence. Give you the number first, then pick up the tool.
FAQs
Expect 20 – 25 years from PGT vinyl fence panels in Orlando, though gates and hinge hardware typically need attention every 5 – 8 years. UV exposure and humidity are the biggest factors. Aluminum PGT fences can last 30+ years, but the bracket hardware is the weak point. Call (850) 427-6454 and we’ll help you evaluate what you have and what it realistically needs.
Yes, in most cases we can replace individual panels, posts, or gates without touching the rest of the fence. The exception is when the posts are the problem: if the original installation didn’t set them deep enough, repairing the post often means digging up and re-setting it, which is a bigger job. We’ll give you an honest assessment before any work starts. Call (850) 427-6454 for a free estimate.
Most residential PGT fence installations in Orlando take 1 – 2 days on site, depending on linear footage, access, and whether we’re removing an old fence first. We set concrete for the posts and come back to hang panels after the concrete has set. We’ll give you a defined arrival window before the project starts.
We stock PGT-compatible panels, posts, gate hardware, and both current and older-spec components on our trucks in Orlando. If we need to order something specific for your fence, we’ll tell you the lead time before you pay anything. You never have to source parts yourself. Call (850) 427-6454 and we’ll check inventory while you’re on the phone.
If you’re ready for a real number on PGT fence installation in Orlando, call Penhallow Remodeling Orlando at (850) 427-6454 for a free estimate. We’ll give you a written price before any work starts, and we’ll stand behind the work for a full year. No pressure, no vague ballpark, no change orders at the door. Just the price, in writing, before the first post goes in the ground. We also work with homeowners on KraftMaid, Cambria, and Silestone projects, so if your Orlando home needs more than a fence, we can talk about that too.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
