Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Orlando Owner’s Guide
KraftMaid fence installation in Orlando typically runs $3,500 – $9,000 installed, depending on linear footage, gate count, and whether we’re pulling an old fence or starting fresh. Most homeowners call us after a section blows out during a summer thunderstorm or a gate starts dragging hard against the concrete. We keep common KraftMaid-compatible fence components on our trucks, which means we can usually diagnose the problem, write you a number, and get the repair done without waiting on a supplier run.
You’ll usually spot the failure before it becomes a full collapse. A post leaning a few degrees after heavy rain, a picket that splits at the screw line, or a gate latch that suddenly won’t catch. Orlando’s afternoon downpours and sandy, shifting soil do a number on fence installations that weren’t set deep enough or built with rust-resistant hardware. Give you the number first, then pick up the tool.
Which KraftMaid Models This Applies To
KraftMaid’s name sits on a range of fencing lines, mostly sold through big-box and builder suppliers across Central Florida. The compatibility gotcha we see most often is post spacing. Some KraftMaid panel systems are engineered for 6-foot on-center post placement, while others use 8-foot. If your original installer set posts to the wrong spacing for the panel spec, every replacement panel has to be cut or the posts reset. That’s the difference between a $400 repair and a $2,000 one.
For parts matching, look for the manufacturer label on the back of a picket or inside the top rail channel. It’ll show a series code and sometimes the production date. If the label is long gone, measure the picket width: KraftMaid privacy panels in this region usually run 5-1/2 to 7-1/2 inches wide per picket, with heights of 4, 6, or 8 feet. OEM KraftMaid parts cost more but keep the same color blend and fastener spacing as your original install. Quality aftermarket equivalents from trade suppliers often match within an eighth of an inch and carry their own finish warranty. We’ll show you both options with prices on the written estimate.
Penhallow Remodeling Orlando is an independent service provider. We’re not a KraftMaid dealer or franchise, but we install and repair their fence systems regularly across Orlando and source parts from recognized trade suppliers.
Styles & brands we work with
Signs Your KraftMaid Fence Installation Is Failing
- Posts leaning after rain. In Orlando’s sandy loam, posts set less than 24 inches deep with a skimpy concrete collar start moving within two or three wet seasons. The fix usually means digging out, resetting, and adding proper drainage stone at the base.
- Gate dragging or hanging crooked. This is almost always a hinge-pull or a post that’s lost its grip. KraftMaid gate hardware is decent, but Florida humidity eats uncoated steel hardware fast. We replace hinges, lag bolts, and sometimes the post itself.
- Splitting pickets at the fastener line. Vinyl and composite boards expand and contract in Orlando heat. If the installer drove screws too tight or skipped the pre-drilled slots, the boards crack along the screw line. The panel can sometimes be patched; more often, the board gets swapped.
- Bottom rail sagging between posts. This points to undersized rails for the span, which is common when someone scabbed an 8-foot panel onto 6-foot rails. The fix is a rail replacement, not a prop.
- White chalky residue on the rails. That’s the finish oxidizing. Not structural, but it means the protective coating is failing. If it’s caught early, a quality touch-up can extend the fence another few years. If left alone, Orlando’s UV does the rest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most KraftMaid fence installation work in Orlando falls between $3,500 and $9,000 for full fence replacement or significant section rebuilds. Smaller repairs, like resetting two posts and replacing a gate, usually land lower, in the $800 – $2,500 range depending on access and the condition of the existing panels. What drives the number is linear footage, the number of gates, and whether the old posts are salvageable. Pulling rotted post stumps and old concrete footers adds labor hours. A straight, flat yard with good access is the happy case.
Every Penhallow fence job includes the same thing: a written price before we start, parts and labor broken out line by line, and our 365-Day Done Right Promise in writing. If the repair fails inside the guarantee window, we come back and fix it at no charge. No service call fee, no re-inspection fee. You’ll also know who’s arriving: background-checked, uniformed technicians, every time.
DIY or Call Us?
There are two things you can safely check yourself. First, look at whether the gate catches on the latch or the post itself; a latch adjustment is a ten-minute fix with a screwdriver. Second, eyeball your posts. If a post moves more than an inch when you push the top, the footing has failed. That’s a dig-and-reset job, not a shim job.
What you shouldn’t do is pull a leaning post out with a truck, or start resetting things half-dug with a storm rolling in. Orlando’s summer lightning and rain turn a half-finished fence project into a dangerous afternoon real quick. If the post is carrying gate weight or the panel is coming apart at the rail, just call us at (850) 427-6454. We’ll come out, look at it, and hand you a written number before any work starts.
FAQs
A properly installed KraftMaid fence in Orlando should last 15 to 20 years, though hardware and gate components typically need attention around year 8 to 10 because of the humidity and afternoon storms. The structural weak point is almost always the posts, not the panels. Call (850) 427-6454 and we’ll take a look at what’s failing before you budget for a full replacement.
Most of the time, yes, a single damaged section can be repaired without replacing the whole fence. The exception is when several posts have failed or the panels have warped so badly the lines won’t connect cleanly. We’ll price both the repair and the full replacement on the estimate so you can decide.
A typical fence installation or major section replacement around Orlando takes one to two working days, assuming the ground isn’t waterlogged. Post-setting needs a day to cure before panels hang. If you need it done around a weather window, call (850) 427-6454 and we’ll get you on the schedule with a real arrival time.
We keep common KraftMaid-compatible rails, pickets, and gate hardware in our Orlando trucks, and we can source the rest through our trade suppliers, usually within a day or two. You won’t need to chase down the part yourself. Call us and we’ll verify the spec and get it coming.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
