Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Orlando Owner’s Guide
If you have a Jerith kitchen product with a failed component, we can source or match the part and handle the install. A typical Jerith-compatible kitchen remodel in Orlando runs $14,000 – $45,000, with most full-kitchen projects landing between $20,000 and $35,000 depending on cabinet line, countertop material, and how much of the existing layout we’re keeping. Most homeowners discover the problem the hard way: a drawer front that won’t sit flush, a hinge that’s stripped out of the cabinet box, or a slide that grinds every time you open it.
Jerith isn’t a brand you’ll find on every contractor’s shelf, which is exactly why you’re probably reading this after calling three other places. We keep common Jerith-compatible hardware and components on hand in Orlando, and when we don’t have it in the truck, we know which local suppliers actually carry it. Trevor Nash has always run Penhallow Remodeling on a simple rule: give you the number first, then pick up the tool.
Which Jerith Models This Applies To
Jerith manufactured kitchen cabinetry and related millwork in several series lines over the years, and the hardware specs changed between generations. The most common cabinets we service in Orlando are the framed-face styles from the 1990s and early 2000s, which used a 1/2-inch overlay hinge with a 35mm cup. Later production runs moved to a full-overlay European-style hinge, and those are not interchangeable. If you look inside the cabinet door, the hinge cup will either have a visible manufacturer stamp like Grass or Blum, or it’ll be blank, which usually points to an early Jerith original.
The compatibility gotcha most owners miss: drawer slides on Jerith cabinets are measured by drawer box width, not the width of the drawer face. A 15-inch face can sit on a 12-inch box, and ordering a 15-inch slide means a return trip. We match slides by measuring the box, not the front. For OEM versus aftermarket, we tell Orlando customers straight: quality aftermarket hinges from Blum or Grass often outlast the originals and cost 20 – 30% less, but if you want an exact factory match for resale or aesthetic reasons, we’ll source it and show you the supplier invoice before we order.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Drawer drifts open on its own. The slide’s ball bearings are worn unevenly, or the nylon roller on an older Jerith slide has cracked. Florida humidity accelerates this by swelling the drawer box slightly, putting constant pressure on tired hardware.
- Door rubs against the cabinet frame when you close it. Usually a sagging hinge that’s lost its tension, or the mounting screws have stripped out of the particleboard face frame. Tightening them without filling and re-drilling buys maybe two weeks.
- Soft-close stops working with a hard slam. The damper piston inside the hinge cup has seized or leaked its oil. In Orlando’s heat, those pistons fail faster than the hinge itself, which is why we replace the damper first before recommending a full hinge swap.
- Laminate edge peeling or delaminating. Jerith cabinet doors from certain production years used heat-applied edge banding that lets go after 15 – 20 years of Orlando’s humidity swings. Once moisture gets behind it, the MDF core swells and the door is beyond repair.
- Shelf clips keep popping out of the pilasters. The adjustable shelf ladder strips, which are plastic on many Jerith models, get brittle with age and heat exposure. We replace them with metal clips that fit the same pin spacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Jerith kitchen remodel in Orlando, you’re looking at $14,000 – $45,000 installed. The biggest driver is whether we’re replacing the whole kitchen or repairing and re-facing what you have. A full-gut replacement with new KraftMaid or Wellborn cabinets, Cambria or Silestone countertops, and a tile backsplash lands in the $25,000 – $40,000 range. If your Jerith cabinet boxes are still solid and we’re doing doors, drawer fronts, slides, hinges, and countertops, that tends to run $9,000 – $20,000.
Every quote is written, not verbal, and the number on day one is the number on the final invoice. That includes parts, labor, haul-away, and any permit work if you’re changing plumbing or electrical. If something fails inside the first year after we finish, our 365-Day Done Right Promise covers the return visit, the parts, and the labor, all in writing before work starts.
DIY or Call Us?
You can safely diagnose a lot of Jerith hardware issues yourself: check whether a hinge is visibly bent, measure a drawer box to confirm slide width, or look for a stamp on the hinge cup. Replacing a single hinge or a set of drawer slides is within reach if you have a drill and patience for lining up mounting holes.
But there are two places where DIY goes wrong fast. First, stripping out particleboard frame holes while re-hanging doors turns a $40 hinge replacement into a box repair. Second, when the failure is in the cabinet box itself, whether it’s swollen MDF from a past leak or a cracked face frame joint, you’ll need clamps, glue, and the judgment to know whether the box is even worth saving. That’s where we come in. If you’re not sure, call (850) 427-6454, and Trevor or one of our background-checked, uniformed Orlando technicians will tell you over the phone whether it’s a parts swap or a bigger conversation.
FAQs
In Orlando’s climate, Jerith cabinets typically last 15 – 25 years before hardware failures or moisture damage force a decision. The hinges and slides go first, usually inside 10 – 15 years, which is why we tell owners that replacing the hardware is often smarter than replacing the boxes. Call (850) 427-6454 for a free assessment of what you’re working with.
Yes, many Jerith doors can be repaired if the core hasn’t swollen. Loose hinges, chipped laminate edges, and worn drawer slides are all repairable at a fraction of replacement cost. Once water has penetrated the MDF core, though, the door is done. We’ll tell you which situation you have before any work begins. Call (850) 427-6454 and we’ll take a look.
Most Jerith kitchen remodels in Orlando take 3 – 6 weeks from the first day of demo to the final walkthrough. A hardware-only refresh on existing Jerith cabinets can be done in 1 – 3 days. We give you a written timeline with the written price, so you know the window before we start. Call (850) 427-6454 to schedule a free estimate.
We stock common Jerith-compatible hinges, drawer slides, shelf clips, and dampers on our Orlando trucks, and we can source original Jerith components through local suppliers when needed. We also carry hardware matched to KraftMaid, Cambria, and Silestone systems. If we need to order something, we show you the cost before we place the order. Call (850) 427-6454 and we’ll check availability for your specific model.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
