Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The Orlando Owner’s Guide
If you have a Jerith shower enclosure, tub surround, or vanity system that’s failing, we stock and install full Jerith-compatible bathroom remodeling in Orlando, with typical installed projects running $9,000 – $28,000 depending on scope. Most owners discover the problem the same way: a shower door that no longer seals, a vanity door that hangs crooked, or tile grout that’s crumbling around a Jerith base. In most cases we can have a background-checked technician out to assess the failure within a few days, not weeks.
What we see most often in Orlando homes is moisture intrusion around Jerith-framed enclosures. The aluminum frames hold up fine, but the seals and gaskets give out, and water gets behind them into the wall cavity. By the time you see the staining, the framing and drywall behind the unit have already started to go. That’s the difference between a simple part swap and a full remodel.
Which Jerith Models This Applies To
Jerith has manufactured aluminum-framed shower enclosures and tub surrounds for decades, and most of the units we see in Orlando homes fall into three lines: the Classic series (standard 3/8-inch glass, anodized frames), the Deluxe series (heavier 1/2-inch glass, reinforced headers), and the newer Frameless series that started appearing in higher-end builds around 2015. Each series uses different hinge hardware, and that’s where compatibility starts to matter.
The gotcha most owners don’t know: Jerith changed hinge geometry between the Deluxe and Frameless series. A hinge from a Classic unit will not fit a Deluxe frame even if the glass thickness is the same. Before ordering any part, look for the Jerith label etched in the lower corner of the glass or on the header rail. If you see a four-digit date code (like “J-0914”), the last two digits typically indicate the year, which helps us identify the exact hardware batch. We also work with quality aftermarket equivalents when Jerith OEM parts are discontinued, but only where the hinge geometry and weight rating match. Glass is glass; the hinge is what lets a 90-pound panel swing safely.
Styles & brands we work with
Signs Your Jerith Bathroom Remodeling Is Failing
- Cloudy or milky glass that won’t clean up: Orlando’s hard water builds up mineral deposits, but if the clouding persists after descaling, the glass has begun to etch. It’s not a cleaning issue; it’s degradation of the glass surface, and replacement is the only fix.
- Water pooling at the base of the frame: The sweep seal under the door has compressed or torn. In Orlando’s humidity, this is the most common Jerith failure point, and it’s usually a $20 part. But if the pooling has been happening for months, check for soft drywall below the tile line.
- Hinge screws spinning in place: The aluminum frame has stripped around the screw, often from someone over-tightening after a sagging door. The frame isn’t repairable at that point; the whole panel assembly gets replaced.
- A door that swings itself shut or open: The frame has gone out of level, either from settling or from a top hinge pulling away. Adjusting the plumb is a temporary fix; the underlying issue is usually in the substrate (the moisture-resistant layer behind your tile) shifting.
- Grout crumbling only around the Jerith base: Water has been getting behind the frame and wicking into the grout from behind. By the time you see it, the cement board may be saturated. In an Orlando bathroom with daily shower use, this can go from hairline crack to mold inside 12 to 18 months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith-compatible bathroom remodel in Orlando typically runs $9,000 – $28,000. A smaller guest bath (50 square feet or so) with a standard Jerith tub surround replacement and new vanity sits at $5,000 – $12,000. What drives the number is whether we’re doing a swap-in-place part replacement or opening walls, replacing the substrate, and waterproofing from the studs out. The moment we find moisture behind the frame, the job goes from a part swap to a rebuild.
Every job comes with a written price before work starts. Not a range, not a ballpark; the exact number on day one is the number on the invoice. That price includes the parts, the labor, the disposal of the old materials, and the written guarantee. We install real trade products behind the work: Kohler and Moen fixtures, cement board substrate, waterproofing membrane, and quality tile. You hold the brand warranties alongside ours, and if anything fails inside the coverage period, we come back and fix it at no charge.
DIY or Call Us?
Some things a homeowner can safely check: the sweep seal at the bottom of a Jerith door slides out and goes back in with a firm push, and cleaning the track of mineral buildup helps more than you’d think. But glass panels are heavy, and the hinge hardware is under load. A 50-pound panel swinging on a failing hinge can shatter or take a chunk out of a tile wall, and that’s before you get into the water damage hiding behind the frame. If the failure involves a hinge, a frame rail, or any sign of water staining below the unit, don’t open the wall yourself. We’ve rebuilt several Orlando bathrooms where a well-intentioned DIY repair turned a $300 hinge replacement into a $12,000 waterproofing job.
Call (850) 427-6454 and we’ll walk you through what you’re seeing. Give you the number first, then pick up the tool.
FAQs
Expect 15 – 25 years for the frame and glass, but the seals, hinges, and gaskets typically need service every 5 – 8 years. Orlando’s humidity and hard water dramatically shorten the life of the finish hardware; we regularly replace hinge sets on Jerith units that are only six years old because the chrome has degraded and stripped screw seats.
Yes, if the failure is in a replaceable part: a sweep seal, a gasket, a hinge. No, if the wall behind the frame has been taking on water or the frame itself is stripped. We’ll tell you which one you have, and it costs nothing to have us look. Call (850) 427-6454 to schedule a free assessment.
Most projects run 3 to 6 weeks depending on whether we’re replacing inside the existing footprint or moving plumbing, and whether we’re pulling new permits. A simple tub-to-shower conversion with a Jerith-compatible surround runs toward the short end; a full gut with tile and new plumbing to the wall runs longer. We’ll give you a written schedule with the written price.
We stock the common wear parts: sweep seals, gaskets, hinge sets, and rollers for the Classic and Deluxe lines, plus quality aftermarket equivalents. We also carry the materials we use most in Orlando bathroom remodels, including KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen fixtures. If what you need is discontinued, we’ll source a compatible match and show you the weight rating before we order it.
If your Jerith bathroom is showing its age, call (850) 427-6454 for a free estimate. We’ll schedule a visit, put a written price in your hand before any work starts, and stand behind the job with the 365-Day Done Right Promise.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
