Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose ES Windows Construction
We provide Es Windows in Orlando construction, repair, and replacement service, and we do it the way Trevor Nash runs every job at Penhallow Remodeling: give you the number first, then pick up the tool. That means a written price before work starts, a real arrival window, and a 365-day promise to make it right if something fails. Our Orlando crew has spent a decade working inside ES Windows homes across Central Florida, from Wekiva Springs to College Park, and we know the extrusion tells, the gasket pinch points, and the exact torque sequence that keeps ES hardware from working loose after a hurricane season. We are an independent ES Windows service provider, not an authorized dealer or factory warranty station, and we will tell you plainly when a repair makes sense and when a replacement is the honest call. Call us at (850) 427-6454 for a free estimate.
Why Trust Penhallow Remodeling Orlando for Your ES Windows Construction?
ES Windows are common in Orlando because they are built for Florida wind loads and then they age in Florida heat. That aging pattern is specific: gaskets dry out, thermal breaks degrade, locking cams drift out of alignment after enough pressure cycles. A crew that has never pulled an ES Windows 7000 Series sash apart will misdiagnose the problem and sell you a replacement you did not need. Our technicians have done that work hundreds of times. Trevor Nash started in construction at Los Angeles Trade-Technical College and spent two decades on everything from slab foundations to finish carpentry, and he brought that hands-on standard here. When we see condensation inside an ES glass pack, we do not assume a failed seal. We check the thermal break first, because in Orlando’s alternating sun and storms, that is the part that fails first. Every technician who walks through your door is background-checked and uniformed, and the written quote you get before work starts is the number on the invoice. That is the Kingswell Way. Say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it.
One more thing worth saying directly: we are not affiliated with or authorized by ES Windows. We are an independent Orlando contractor offering General Contractor services with deep ES Windows experience. That independence is useful. We will tell you if a repair is worth doing even when the manufacturer would rather sell you a new unit. We will also tell you when the manufacturer’s own replacement part is the only part we would install, because we have seen the aftermarket copy fail inside a year.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in Orlando
Here are the failure modes we see most often in Orlando. If you own ES Windows, one of these will sound familiar.
- Thermal break degradation on the 7000 Series single-hung. The 7000 Series uses a structural thermal break between the interior and exterior aluminum. After eight to twelve years of Orlando heat cycling, that break can crack or delaminate. You will notice condensation inside the glass pack, or black soot streaks on the interior frame edges. This is not a sealed-unit failure, and replacing the glass will not fix it. We replace the thermal break and reseal the frame with ES-spec butyl tape.
- Locking cam misalignment on impact-rated casements. ESW impact casements live through Miami-Dade pressure cycling and repeated slamming from kids and afternoon storms. Over time the locking cam drifts, and the center rail does not seat tight. Water gets in at the center rail during heavy rain. The fix is a cam realignment and reseal, not a new sash, unless the cam housing itself is cracked.
- Glazing wedge gaskets drying out on Silver Line units. ES Windows Silver Line was builder-grade, and those wedge gaskets were never meant for two decades of Florida exposure. They curl, shrink, and pull away from the glass, which turns Orlando’s afternoon downpours into interior drip lines along the bottom sash. We re-glaze with fresh ES-profile gaskets and the leaking stops.
- Vinyl weld failure on 5000 Series corners. The 5000 Series casement and picture units weld at the corners, and on west-facing walls in Orlando, UV exposure is brutal. The weld splits first at the bottom corner. You will see a hairline crack and feel a draft. We can repair a small split with a structural weld repair, but if the corner has fully separated or the extrusion is deformed, replacement is the honest recommendation.
- Weep system blockage and sill rot on early-2000s ES installations. Many ES Windows in Orlando tract homes from the early 2000s were installed before modern sill pan flashing was standard. Weep holes plug with dirt and pollen, water backs up, and the sill or drywall underneath rots. We clear the weeps, check the sill pan, and replace rotted substrate with moisture-resistant material before resetting the window.
If you recognize any of these symptoms, call (850) 427-6454. Diagnosis is part of the free estimate.
ES Windows Parts & Our Repair-vs-Replace Approach
We source genuine ES Windows hardware and gaskets whenever they are available. For discontinued Silver Line trim and older 5000 Series components, ES Windows has stopped making some parts, and the factory will not re-release them. In those cases we use certified aftermarket parts that match the original profile exactly – same extrusion dimensions, same gasket durometer, same thermal performance. We will never put a generic, close-enough part on your ES window and call it done. The three reasons we recommend replacement over repair are these: the thermal break is compromised, the vinyl weld is split, or the unit is undersized for current wind load under the latest Orlando building code. If the frame is sound and the glass is good, we repair. That is the honest line. Call (850) 427-6454 and we will tell you which side of it your window falls on.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis at the window. We inspect the unit while it is in the opening, check the thermal break, the gaskets, the locking cams, and the weep system. We measure the frame for square and check for water staining inside the wall cavity. You get the diagnosis in plain English, not trade shorthand, and you get a written price before any work starts.
- 2
Repair or replacement, done the right way. For a repair, we remove the sash, replace the failing part with genuine ES or profile-matched aftermarket components, reseal with ES-spec butyl tape, and reset hardware to factory torque. For a replacement, we pull the old unit, repair any rotted substrate, set the new window on a proper sill pan, flash it, and seal it. Impact units get installed to Miami-Dade standards, including the correct anchoring schedule for the opening.
- 3
Water and wind test. We run a hose test on the exterior and a pressure check on impact units before we call the job done. If water gets in, we fix it before we leave. This is the step most crews skip in Orlando, and it is the step that predicts whether you will call back in six weeks.
- 4
Written guarantee. Every ES Windows repair and installation from Penhallow Remodeling Orlando carries the 365-Day Done Right Promise. If it fails inside a year, we come back and fix it at no charge. No service call fee, no re-inspection fee. It is in writing, on every job.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Orlando
We work on the ES Windows product lines most common in Es Windows in Kissimmee and Orlando-area homes. That includes the ES Windows Impact Series, which is Miami-Dade approved and common in new construction and replacement alike; the 7000 Series Single-Hung, which sits in thousands of 1990s and 2000s tract homes; the Silver Line, the builder-grade option from the early 2000s; and the 5000 Series Casement, which shows up often in custom homes and additions from the late 1990s forward. We stock common gaskets, locking cams, and butyl tape locally so most repairs do not wait on a parts order. When you call, asking what model you have is helpful but not required. We can identify ES frames by the extrusion profile, and the part number is almost always stamped somewhere on the frame or sash.
We Also Service These Brands
We are not a single-brand shop. Our Orlando crew also installs and services KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler and Moen fixtures, and James Hardie siding. That breadth matters on a remodel where the window replacement touches the drywall, the trim, and the countertop below it. One crew, one written quote, one guarantee.
FAQs – ES Windows Construction Service in Orlando
No, we are an independent ES Windows service provider, not an authorized dealer or factory warranty station. That independence does not weaken our ES Windows work; it sharpens our advice. We will recommend a repair the factory would rather not discuss, and we will source genuine ES Windows parts when they matter. Call (850) 427-6454 for a straight answer on your specific window.
On the 7000 Series, condensation between the panes is usually thermal break degradation, not a failed sealed unit. The structural thermal break cracks or delaminates, and moisture finds its way into the space that should be dry. Replacing the glass will not cure it because the break is still compromised. We inspect the frame, verify the break, and replace it before resealing. Call (850) 427-6454 and we will diagnose yours.
Most locking cam drift on impact casements is repairable. We realign the cam, reset the hardware to factory torque, and test the seal. You need a new sash only if the cam housing is cracked or the extrusion around it is deformed. Either way, you will know before you pay anything, because the diagnosis is part of the free written estimate. Call (850) 427-6454.
It is common, but it is not normal, and you should not live with it. On older Silver Line units the glazing wedge gaskets dry out and curl, and water rides straight down the glass into the interior. We re-glaze with fresh ES-profile gaskets. If the water caused drywall or sill damage behind the window, we repair that substrate too. Call (850) 427-6454 for a free estimate before the next rainy season.
Yes, and we rarely need the model number. ES frames carry identifying extrusion profiles, and our crew can tell a Silver Line from a 7000 Series by the frame geometry and hardware. Early-2000s installations often have two other issues we check at the same time: missing sill pans and plugged weep holes. For homeowners seeking ES Windows Construction in St. Cloud, FL, we apply the same inspection standards. Call (850) 427-6454 and we will sort out what you have.
Window replacement on an Orlando home typically runs $4,500 to $15,000 depending on the number of units and frame condition. Impact window installation runs $8,000 to $25,000 for a whole-home retrofit with Miami-Dade-rated units. Roof repair work associated with window leaks runs $400 to $1,800 depending on the flashing and decking involved. Those are real ranges, and the written quote you get after diagnosis is the number you will pay. Call (850) 427-6454 for a free estimate.
| Service | Price Range in Orlando |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
The price moves up or down based on how many windows you have, whether the existing frames are square and salvageable, whether we are matching an existing ES profile or switching you to a new series, and whether the openings need rotted-sill repair before the new unit goes in. Trevor Nash will walk you through every one of those variables before the first tool comes off the truck.
Book Your ES Windows Service in Orlando, FL
If your ES Windows are leaking, sweating, or failing a hurricane-season inspection, call (850) 427-6454. We will diagnose the problem, hand you a written number, and book a real arrival window. Orlando homeowners have been trusting Penhallow Remodeling Orlando to make it right since the first bungalow we worked on in College Park.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving Orlando since he brought his years of hands-on construction and finish carpentry experience to Central Florida.
