Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The Orlando Owner’s Guide
We stock and install CGI-compatible roofing components across Orlando, handling everything from replacement sealants and flashing kits to full panel section swaps. Most CGI roof repairs in Orlando run $400 – $1,800 installed, depending on whether you’re dealing with a few lifted fasteners or a storm-damaged panel run. The typical discovery moment goes something like this: a neighbor’s tree limb skids across your roof during a summer squall, you spot a water stain spreading across the garage ceiling a week later, and suddenly you’re looking up at your CGI roof wondering exactly what part failed and whether anyone in Orlando actually stocks it.
They do. We do. Here’s what you need to know to get the right part, at the right price, without guessing.
Which CGI Models This Applies To
CGI’s residential roofing line in Florida breaks down into a few distinct series: the Olympia metal shingle system, the Riviera and Solstice standing-seam profiles, and the Galvalume corrugated panels you’ll see on plenty of Orlando workshops and carports. Each series uses its own fasteners, clips, and trim profiles, which is where the compatibility gotchas hide. The Olympia shingle, for example, uses a concealed interlocking clip that seats differently than the exposed-fastener pattern on Riviera panels. Mix them up and you’ll have a roof that looks right from the curb but starts chattering in the first afternoon thunderstorm.
If you can find the original paperwork, the panel profile, gauge, and color code are stamped on the invoice. If you can’t, the quickest identification route is a measurement: Olympia shingles run roughly 48 inches long with a 12-inch exposure, while Riviera panels come in 12- to 18-inch widths depending on the seam configuration. As for OEM versus aftermarket, for CGI specifically we lean OEM on anything that touches water: factory-matched sealants, closure strips, and transition flashing. Florida’s UV is merciless on aftermarket sealants, and an off-brand closure strip that hairline-cracks at year three will funnel water straight into the deck. For non-water-bearing parts like snow guards (which, honestly, see more action as pigeon deterrents in Orlando), a quality aftermarket equivalent does the job fine.
Styles & brands we work with
Signs Your CGI Roofing Is Failing
- Staining at panel seams or lap joints. This usually means a sealant bed has dried and contracted. CGI panels don’t rust the way old tin roofs do, but the seams still rely on sealant that ages faster in Orlando’s heat and humidity than it would anywhere else.
- Loose or backed-out fasteners scattered across the field. Metal expands and contracts with every temperature swing, and in Orlando you get a lot of swings. When a fastener loses its grip, you’ll hear a soft ticking inside on windy days, and it’s not a ghost.
- Diagonal creases or oil-canning in the panels. A small dent is cosmetic. A diagonal crease running from a fastener means the panel is binding and needs a relief cut or a section swap before it cracks through.
- Rubber-washer debris filling the gutters. Those little black shavings are dead fastener gaskets, and they wash down every time it rains. Once the gasket is gone, the steel screw shank is wearing a bigger hole into the panel with each gust.
- Water staining at ridge caps or hip caps where the profile changes. Transition zones are the most common leak point on any metal roof, CGI included, and a failed transition flashing will drip only during wind-driven rain, which makes it easy to miss until the plywood swells.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair work on CGI systems in Orlando typically lands between $400 and $1,800. The bottom of the range covers resealing a seam run, replacing a dozen fasteners, or reseating a loose panel. The top of the range covers a section swap: removing and replacing a damaged panel or two, installing new closures and flashings, and matching the color closely enough that your neighbor can’t tell. Where a full run of panels needs to come off, you may push past that range, and we’ll show you the line-item math before we touch anything.
| CGI Repair Scope | Typical Orlando Installed Range |
|---|---|
| Seam reseal, single run (materials + labor) | $400 – $700 |
| Fastener replacement, full roof inspection | $500 – $900 |
| Flashing replacement (ridge, hip, or wall transition) | $600 – $1,200 |
| Single panel section replacement | $900 – $1,800 |
Every one of those numbers comes in writing before the crew rolls up. That’s the Penhallow approach and the Kingswell standard we’ve operated under since 2004: a written price first, a defined arrival window, and a written guarantee on the repair. If our fix fails inside 365 days, we come back and make it right at no charge. Not a pro-rated discount, not a re-inspection fee. A return visit, free, until the roof holds.
DIY or Call Us?
Some things are safe to check yourself. A visual sweep from a ladder or from the ground with binoculars: looking for backed-out fasteners, obvious tears at the panel edges, and gaps in the trim. You can clean debris out of valleys and gutters, and you can photograph anything suspicious to send us before we quote. That’s real, useful homework that saves you a trip charge.
What we don’t recommend is walking a metal roof or attempting a seam reseal. Metal panels are slicker than shingles in the morning dew, and one wrong step near a skylight or a soft spot in the deck is how a hundred-dollar repair becomes an ambulance ride. High-tension work on metal profiles, particularly prying and refastening sprung panels, is a job for someone who spends every working week on Orlando roofs. If you’re seeing any of the signs above, call (850) 427-6454 and we’ll give you a real diagnosis and a written number before we pick up a tool. That’s the whole idea: give you the number first, then pick up the tool.
FAQs
A properly installed CGI metal roof in Orlando should hold its water-shedding integrity for 40 to 60 years, with the real variable being the sealant beds and fastener gaskets, not the panels themselves. Annual inspection and touch-up of those consumable parts is what keeps you out of the low end of that range.
Yes, if the damage is limited to the finish or a small dent; no, if the panel has creased through, torn at a fastener hole, or separated at a seam. Small surface scratches can be treated with the matched OEM touch-up system, but structural damage to the panel means replacing the panel. Call (850) 427-6454 and we’ll give you a straight read on which side of the line yours falls on.
A single section swap on a CGI roof typically takes a half day to a full day, once the replacement panel and the sealant are on site and confirmed. The scheduling variable is getting the exact panel profile and color code matched, and we’ll order that before we put you on the calendar.
We keep the common parts on hand: universal seam sealant rated for Central Florida’s UV, replacement fasteners with EPDM washers in the standard CGI head patterns, foam closure strips, and transition flashings for the common CGI profiles. Full-color panel runs are special-order, and we’ll give you the lead time when we quote. We also stock parts for other brands on our trucks, including KraftMaid, Cambria, and Silestone, so the truck’s usually set up for whatever we find on site.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
