







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Fence Installation: The Orlando Owner’s Guide
Cambridge Pavers fence installation in Orlando typically runs $3,500 to $9,000 for a full perimeter or accent fence, depending on linear footage, the specific Cambridge paver product line, and whether you’re doing a freestanding wall or a paver-and-panel hybrid. Most owners discover they need us after a section of their existing fence starts leaning, a gate post pulls loose, or pavers at the base begin to shift after a season of Orlando’s afternoon thunderstorms. We stock Cambridge-compatible installation hardware and can usually assess the job and get materials ordered within a few days. If you’re reading this because your current fence is leaning or the base course is cracking, you’re in the right place.

Here’s the honest picture: Cambridge Pavers makes excellent paver products, but their fence and wall systems live or die by what’s underneath them. In Orlando’s sandy, fast-draining soil, the base preparation matters more than the paver itself. We see a lot of fences where someone skipped the compacted base or used the wrong bedding course, and three years later the whole run has settled unevenly. That’s the fix we do most often.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers manufactures several product lines that get used for fence and wall construction. The most common ones we install in Orlando are from the Ledgestone, Maytrx, and Sherwood collections, along with their Pavingstone lines when the fence incorporates a paver base or column caps. Each line has different dimensional specs: Sherwood pieces run roughly 3.5 to 7 inches in height with a split-face texture, while Ledgestone offers a more uniform 4-inch modular height that speeds up dry-stacking. If you have the original paperwork, the product code is usually printed on the pallet invoice or can be matched from the paver’s face dimensions.
One compatibility gotcha that catches a lot of Orlando owners: Cambridge changed the chamfer profile on several wall units around 2019. Older pre-2019 Ledgestone units have a slightly deeper bevel at the top edge, so if you’re adding onto an existing fence, new units from the same collection may not seat identically with older pieces. We always bring a sample from the existing fence to our supplier match before ordering replacement units. As an independent contractor, Penhallow Remodeling Orlando is not affiliated with Cambridge Pavers, but we work with these products regularly and know which local suppliers carry full lines versus special-order-only SKUs.
Styles & brands we work with







Signs Your Cambridge Pavers Fence Installation Is Failing
- Leaning or bowing sections. This almost always means the base course has washed out or the soil behind the wall is holding water. In Orlando’s wet season, poor drainage behind a fence pushes it forward gradually over a single summer.
- Pavers shifting out of alignment. When individual units start to step out of line, the bedding sand has migrated or the edge restraint has failed. This is common on fences built without a proper concrete or polymer edge restraint at the base.
- Crumbling or spalling on the face. Efflorescence is common and mostly cosmetic, but actual surface flaking means the pavers were exposed to standing water or sprinkler overspray for long stretches. Orlando’s hard irrigation water accelerates this.
- Gate post wobble at the base. A fence gate hinged off a paver column puts enormous torque on the foundation. If the core wasn’t filled with concrete and rebar, the post loosens within two years.
- Visible gaps at the bottom course. If you can see daylight under the first row of pavers, the base is eroding. Left alone, the course above it will crack under its own weight.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Cambridge Pavers fence installation or rebuild in Orlando, you’re looking at $3,500 to $9,000. A short accent wall or fence section under 30 linear feet usually lands near the bottom of that range. A full backyard perimeter with gate columns, a proper concrete footer, drainage stone, and polymer sand easily reaches $7,000 to $9,000. The single biggest cost driver is the base work: removing failed material, re-compacting, and installing proper drainage costs more than the pavers themselves in many Orlando yards.
Every Penhallow fence installation includes a written price before any work starts, labor and materials broken out, and the 365-Day Done Right Promise: if something shifts, cracks, or fails within a year of installation, we come back and fix it at no charge. You’ll get that promise in writing, not as a handshake. We also source Cambridge-compatible installation components through local Orlando suppliers, so when a product has its own manufacturer warranty, you’re covered by both layers.

DIY or Call Us?
If you’re thinking about resetting Cambridge Pavers yourself, know that the dangerous part isn’t glamorous, but it is real: pavers are heavy. A standard wall unit runs 25 to 40 pounds, and a full fence project involves moving literal tons of material. The base prep required, which means excavation, compaction, and drainage stone, is the part most DIYers skip and the part that determines whether your fence still looks right after two Orlando rainy seasons.
What you can safely check on your own: whether sprinkler heads are spraying directly on the pavers, whether the fence has a visible gap at the base, and whether the ground slopes away from the fence line. Those observations help us quote the job accurately. What you should not do is start pulling up failed courses and re-stacking them without a compacted base, because that’s how a leaning fence becomes a fallen one. Call (850) 427-6454 and we’ll give you a straight answer about what needs to happen.
FAQs

With proper base preparation and drainage, a Cambridge Pavers fence in Orlando should last 25 to 40 years. The pavers themselves rarely fail; what fails is the base underneath them when drainage isn’t handled correctly for Florida’s wet-dry soil cycles. We’ve pulled up 10-year-old fences that were salvageable and 3-year-old ones that weren’t, and the difference was always the base, never the product. Call (850) 427-6454 for an evaluation if your fence is showing early movement.
Sometimes a buried section can be dug out, re-compacted, and re-set, but if the base has washed out across multiple sections, a partial rebuild with a new drainage layer and edge restraint is the honest fix. Repairs without fixing the water problem repeat themselves. We’ll tell you which approach applies to your fence after looking at it. Estimates are free.
A typical Orlando fence installation takes 3 to 7 working days, depending on linear footage and how much failed base material has to be removed first. We give you a written schedule before we start and a defined arrival window for each day of work.
We don’t keep full pallets of Cambridge wall units in our truck, but we maintain relationships with Orlando suppliers who stock Ledgestone, Maytrx, and Sherwood lines plus the base, drainage, adhesive, and edge restraint components the installation requires. If your existing fence uses a special-order color or texture, we’ll source samples for you to approve before ordering. Call (850) 427-6454 to get a material lead time for your specific fence.
If your Cambridge Pavers fence is leaning, cracking, or just looks wrong, call (850) 427-6454. We’ll come out, look at what’s underneath the surface, and give you a written price for the fix before any work starts. That’s how Trevor Nash runs Penhallow Remodeling Orlando: give you the number first, then pick up the tool.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.


