A Penhallow company - serving Orlando, FL
An open living room and dining area after a whole-home remodel

Atlas Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Orlando
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Atlas Windows & Doors: The Orlando Owner’s Guide

If you’ve got an Atlas window or door with a failed balance, a worn roller, a cracked sash, or a lock that no longer catches, we stock and install Atlas-compatible parts across Orlando, with most replacements running $180 – $650 installed depending on the component. The typical Atlas failure doesn’t announce itself loudly. You’ll notice a window that suddenly drops when you open it, a patio door that scrapes along its track, or a handle that spins without engaging the latch. That’s usually the moment an Orlando homeowner starts searching for whether it’s worth fixing or replacing. We’ll walk you through exactly what you’re dealing with, what it costs, and whether the part is something we can swap in one visit.

Two contractors framing a doorway during a professional bathroom renovation nationwide

Call (850) 427-6454

Which Atlas Models This Applies To

An open living space after a whole-home remodel

Atlas has produced several window and door lines over the years, and the parts aren’t always interchangeable, which is where a lot of Orlando homeowners get tripped up. The most common Atlas windows we see in Orlando homes are the Series 5000 and Series 6000 single-hung and horizontal slider lines, along with the Atlas 8000 impact-rated units that became popular after the 2004 hurricane code changes. Your window’s series number is printed on a small foil label on the inside of the frame, usually on the top edge of the sash. If that label is gone or faded, we can identify the balance system by the sash weight and channel width, but it takes a physical look, not a guess over the phone.

For parts, you have an OEM path and a quality aftermarket path. OEM Atlas balances and rollers match the original dimensions exactly, which matters when a replacement part from a generic supplier is off by an eighth of an inch and the window never closes right again. Quality aftermarket equivalents, from manufacturers like Amesbury or Caldwell, often match or exceed the original spec for a lower price, but they have to be selected by channel width, sash weight, and spring rating, not just “Atlas window balance.” We carry both options and will tell you honestly which one makes sense for your window’s age and condition. Something to know up front: Atlas impact-rated sashes use a heavier balance than the non-impact version of the same size, so don’t swap one for the other based on looks alone.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Atlas Windows & Doors Is Failing

Most Atlas window and door failures give you fair warning before they become a bigger problem. Here are the symptoms we see most often across Orlando homes, including the older bungalows in College Park where humidity and settling do a number on window frames:

  • Window drops or slams when you open it. This is a failed balance spring or a snapped balance shoe. The window still looks fine from the outside, but the counterweight system that holds it up has given out, and each slam puts more stress on the frame.
  • Sash tilts, binds, or won’t lock square. The pivot bar at the bottom of the sash has bent or the pivot lock shoe has cracked. This is common on Atlas single-hungs that have been forced open when the balance was already going.
  • Patio door drags or sounds gritty. Worn roller assemblies. Atlas patio doors run on tandem steel rollers that corrode in Orlando humidity long before the door itself fails. Waiting to replace the rollers wears grooves into the bottom track, which turns a $90 part into a full door replacement.
  • Lock or handle turns without engaging. The latch mechanism inside the door or window has stripped, or the keeper on the frame has shifted. On Atlas multi-point locks, one failed point means the whole assembly needs replacing, not just the handle.
  • Condensation between the panes. The insulated glass unit’s seal has failed. This one is less about the moving parts and more about the glass itself, but Atlas sashes from the mid-2000s in Orlando often show seal failure at the 15 to 18 year mark given our heat and humidity cycles.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled living room with built-in shelves around the fireplace

In Orlando, here’s what you should expect to pay for common Atlas window and door part replacements, installed:

  • Window balance replacement: $180 – $280 per window, including the part and labor.
  • Pivot bar and lock shoe: $220 – $320 per window.
  • Patio door roller assembly: $240 – $400 per door, including cleaning and lubricating the track.
  • Multi-point lock assembly: $350 – $650 per door, depending on the lock’s length and whether the keeper needs re-mounting.
  • Insulated glass unit replacement: $300 – $650 per sash, depending on glass size and whether it’s impact-rated or Low-E coated.

The range comes down to the part itself and whether we’re dealing with an OEM Atlas component or a quality aftermarket equivalent we’ve selected for your specific sash weight and channel. Every price we give is written before we start, not a ballpark we revise after we open the wall or pull the sash. That’s the Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. Every part we install carries a written guarantee, and if the repair fails inside the guarantee period, we’re back at no charge for the part, the labor, and the second visit.

DIY or Call Us?

Some things are safe to check yourself. Watch your window or door operate. Look at the label on the frame. If a screw is loose on the keeper or handle, tighten it. That’s about where the safe do-it-yourself territory ends with Atlas windows and doors. Window balances and patio door springs are under constant tension. A balance that’s coiled wrong can fire a metal shoe across the room when you release it, and a patio door that comes off its track during a roller swap is a smashed toe or a broken window waiting to happen. We’ve also fixed more than a few DIY attempts where the wrong balance was ordered online, installed anyway, and the window now tilts because the pivot bar was bent in the process. If you’d rather have a professional handle it, call (850) 427-6454 and we’ll match the part to your window, install it, and stand behind the work.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Getting started with Penhallow in Orlando

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Orlando team

A local crew that works across Orlando and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orlando? Licensed & insured · Free written quotes response · free estimates
Call (850) 427-6454
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Penhallow Remodeling Orlando responds fast. No obligation.

By clicking submit, you agree to our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch