Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Orlando Owner’s Guide
If you have a Techo-Bloc product installed in your Orlando bathroom and something has failed, we can source and replace it. A Techo-Bloc bathroom remodel in Orlando typically runs $9,000 – $28,000 depending on the product line, the scope of the failure, and what’s behind the wall once we open it up. Most owners discover the problem the same way: a crack that widens, discoloration spreading from a seam, or water showing up where water shouldn’t be. Techo-Bloc is better known for hardscaping than interior bathroom fixtures, so when a Techo-Bloc bathroom element fails, it’s usually an installation or substrate issue rather than the product itself.
Trevor Nash has been pulling apart failed bathroom installations in Orlando long enough to know that the product usually isn’t the villain. The prep work is. We’ll get into that below.
Which Techo-Bloc Models This Applies To
Techo-Bloc’s core catalog is exterior hardscape: pavers, retaining walls, steps, and caps. Where Techo-Bloc intersects with bathroom remodeling in Orlando, it’s almost always an exterior-to-interior transition or a design accent, such as a Techo-Bloc paver used as a shower floor accent, a feature wall, or a vanity backsplash. If your contractor installed Techo-Bloc material inside the bathroom, the compatibility question isn’t about the product’s model number. It’s about whether the product was ever rated for interior wet-area use.
Here’s what matters when matching a replacement: the product’s color code, which is stamped on the original packaging or can be pulled from Techo-Bloc’s catalog by visual match, and the paver or slab dimensions, which Techo-Bloc lists in millimeters. A 60mm paver is not a 60mm tile, and the thickness difference changes how the floor sits against your drain. We also check the surface texture. Exterior pavers have a coarser finish than what you want under bare feet in a shower, and some Techo-Bloc lines are simply not suited to constant moisture. When OEM replacement isn’t practical for an interior application, we’ll recommend a quality alternative that holds up better, and we’ll explain why before you spend a dollar.
Styles & brands we work with
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
- Hairline cracks spreading across the surface. This usually means the substrate (the moisture-resistant layer behind or under the tile or paver) is flexing. Exterior pavers are rigid. If the floor beneath them moves, they crack.
- Discoloration or darkening at the edges. Water is wicking into the material from behind or underneath. That points to a grout failure or a missing moisture barrier, both of which get worse with Orlando’s humidity.
- A musty smell that won’t go away. That’s organic growth feeding on trapped moisture. By the time you smell it, the damage behind the surface is already underway.
- Loose or hollow-sounding pieces. Tap the surface lightly with a screwdriver handle. A hollow sound means the mortar bed has delaminated from the substrate. The piece will eventually lift or crack.
- Grout crumbling or turning powdery. In a wet area, that’s a sign the wrong grout was used or the waterproofing has been compromised. Techo-Bloc exterior products often weren’t meant for sealed interior grout lines.
Replacement Cost & What’s Included
A Techo-Bloc bathroom remodel replacement in Orlando lands in the $9,000 – $28,000 range. The spread exists because we don’t know what’s behind the surface until we open the wall or floor. If the substrate is intact and the failure is isolated to a few pieces, you’re at the lower end. If the waterproofing has failed and framing needs repair, the number climbs.
Every Penhallow Remodeling project in Orlando gets a written price before any work starts. Not a range, not a ballpark. A number. It includes the demolition, substrate repair or replacement, the new material, installation, and cleanup. It also includes our 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge. That’s in writing, on every job. Trevor’s rule is the same one he’s had since he started hanging drywall in Los Angeles: “Give you the number first, then pick up the tool.”
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can inspect the surface: look for cracks, tap for hollow spots, note where water pools or lingers. That’s a useful five minutes. But pulling up a failed paver or tile in a wet area without addressing the waterproofing underneath is how you turn a $1,200 repair into a $12,000 one. The dangerous part here isn’t the material itself. It’s the water that’s already gotten behind it, and what that water is doing to the framing and subfloor. If any of the signs above match what you’re seeing, call (850) 427-6454 and we’ll come look. Estimates are free, and we’ll tell you exactly what we find, whether it’s a simple material swap or a full tear-out.
FAQs
In a properly waterproofed Orlando bathroom, a Techo-Bloc accent or paver floor should last 15 – 20 years. If it was installed over an unsuitable substrate or without proper slope to the drain, it may fail in as little as 2 – 3 years. Call (850) 427-6454 and we’ll tell you which one you have.
In most cases, yes, if the failure is caught early and the substrate is dry and sound. A single cracked paver or a delaminated section can often be removed and reset without replacing the whole surface. We only recommend full replacement when the waterproofing behind it has failed.
A localized repair typically takes 1 – 2 days, including curing time for the mortar or adhesive. A full teardown and reinstall of a shower floor or feature wall runs 3 – 7 days depending on the size of the bathroom and what’s underneath.
We keep common replacement materials on the truck and source Techo-Bloc-specific products through our supplier network, which also includes KraftMaid, Cambria, and Silestone for full bathroom remodels. If your exact Techo-Bloc line is discontinued, we’ll show you the closest match and get your sign-off before ordering.
Call Penhallow Remodeling Orlando
If your Techo-Bloc bathroom installation is failing, the fix starts with a phone call. A live person answers at (850) 427-6454, 24/7. Tell us what you’re seeing, and we’ll schedule a free estimate at a time that works for you. Trevor or one of our background-checked, uniformed technicians will come out, assess the damage, and put a written number in your hand before any work starts. If it’s not done right, we make it right. That’s the whole deal.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
