







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Kitchen Remodeling: The Orlando Owner’s Guide
Techo-Bloc isn’t typically a kitchen cabinet or countertop line. It’s the hardscape brand behind pavers, retaining walls, and outdoor living features. When Orlando homeowners call us about “Techo-Bloc kitchen remodeling,” they almost always mean one of two things: an outdoor kitchen built with Techo-Bloc products that’s now failing, or an indoor kitchen remodel and they’ve heard the Techo-Bloc name and want to know if it applies. If you’ve got a Techo-Bloc outdoor kitchen in the Orlando area with cracked pavers, loose counter surfaces, or failed veneer stone, a full replacement with proper substrate work typically runs $14,000 – $45,000 depending on size, materials, and whether we’re rebuilding structural elements underneath. We’re not affiliated with Techo-Bloc, but we work with their products regularly and we know exactly what fails first in Florida’s climate.

Here’s the honest picture: most people discover their Techo-Bloc outdoor kitchen has a problem the same way Trevor Nash finds them on walkthroughs in College Park. A paver shifts underfoot. A counter surface separates from its base. Water pools where it didn’t before. You touch it, see the gap, and realize it’s been quietly getting worse for months.
Which Techo-Bloc Models This Applies To

Techo-Bloc makes dozens of paver and wall stone product lines, and the compatibility gotcha is this: the finish layer you see is rarely the problem. The substrate underneath is. For outdoor kitchens, the products that typically matter are the Blu 60 and Blu 80 paver lines for flooring, the Mista wall stone for veneer and vertical surfaces, and the Raffinato or Semma cap lines for countertop edges. Each series has different thickness specs: Blu 60 pavers run 60mm, Blu 80 run 80mm. That 20mm difference matters because if someone installed Blu 60 on a base meant for Blu 80 loads, or vice versa, you get shifting and settling.
Identification is straightforward if you know what to look for. Techo-Bloc stamps most pavers with a small logo on the underside or edge. Take a photo of the paver or wall stone next to a ruler before calling us. That gives us the series and thickness for matching. If you’re deciding between OEM Techo-Bloc and aftermarket equivalents: for a full kitchen rebuild, we recommend staying with Techo-Bloc or a direct dimensional match from Unilock or Belgard. Mixing brands that are “close enough” is the most common cause of the edge-lipping and uneven gaps we see. Florida’s humidity also means we spec polymeric sand with a moisture-resistant binding agent, not the cheap stuff that washes out after one Orlando summer.
Styles & brands we work with







Signs Your Techo-Bloc Kitchen Remodeling Is Failing
- Pavers rocking or shifting when you step on them. This usually means the compacted base underneath has settled or eroded. In Orlando, the culprit is often poor drainage after heavy rain, which washes fine material out from under the pavers.
- Counter surface separating from its base or showing uneven gaps. Outdoor kitchen counters take direct sun and rain. If the adhesive or mortar wasn’t rated for both, the bond fails within a few seasons. This is the number one thing we repair on Techo-Bloc builds.
- Wall stone or veneer pulling away from the frame. Horizontal surfaces are forgiving. Vertical stone is not. When you see a gap between the veneer and the structure behind it, water is getting in and the whole assembly needs to come off before it falls off.
- Efflorescence, that white chalky film, that keeps coming back. It’s cosmetic, not structural, but recurring efflorescence means water is moving through the stone. In Florida humidity, the fix is a proper moisture barrier underneath, not just scrubbing.
- Polymetric sand washing out between joints after every rain. This is the early warning sign. If the joints keep emptying, the pavers are moving. Left alone, the movement gets worse and you’re eventually looking at a full reset rather than a re-sand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Techo-Bloc outdoor kitchen rebuild or a full kitchen remodel in Orlando, the honest range is $14,000 – $45,000. The spread comes down to three things: square footage, whether we’re rebuilding the base and drainage from scratch, and what you’re putting on top. A compact outdoor kitchen with new pavers, reset veneer, and a simple counter runs the low end. A full indoor kitchen remodel with new cabinetry, countertops, and backsplash pushes toward the upper end. The $14,000 starting point covers a small kitchen remodel with quality materials, not a patch job.
What’s included: a written price before any work starts, a defined arrival window, the parts and materials at real cost plus labor, and the 365-Day Done Right Promise. If anything we install fails inside that year, we come back and fix it at no charge. That’s in writing on every job. We source from the same brands we’d put in our own homes: KraftMaid and Wellborn for cabinets, Cambria and Silestone for countertops, Kohler and Moen for fixtures. Each carries its own manufacturer warranty alongside ours.
DIY or Call Us?
Here’s an honest split. You can safely pressure-wash your Techo-Bloc surface, re-apply polymeric sand to joints that haven’t structurally failed, and inspect for obvious drainage problems. That’s maintenance, and it’s worth doing. But when pavers are rocking, veneer is pulling away, or a counter surface has separated from its base, the fix is a structural rebuild, not a weekend project. The danger isn’t chemical or electrical here. It’s that the base is failing in a way you can’t see from the surface, and anything you do on top of it will fail again within a season. We’ve seen Orlando homeowners pay twice because they skipped the base work the first time.
The practical first step is a call. Trevor and our crew will come out, look at what’s underneath the surface, and hand you a written number before any tool comes off the truck. Give you the number first, then pick up the tool. That’s the Penhallow way. Call (850) 427-6454 and ask for a free estimate.
FAQs

A properly installed Techo-Bloc outdoor kitchen with a correct base and drainage should last 20 – 30 years before any structural work is needed. The finish pavers themselves hold up well. What fails first in Orlando is almost always the base and drainage underneath, not the Techo-Bloc product itself. Call (850) 427-6454 and we’ll tell you honestly whether you’re looking at a repair or a rebuild.
Yes, if the failure is isolated: a loose paver, a separated counter section, a drainage low spot. We’ll quote a targeted repair with a written guarantee. If the base has settled in multiple areas or water is moving through the whole assembly, a partial fix won’t hold and we’ll tell you that before taking the job. Call us for a free look at what’s actually going on.
Most Techo-Bloc outdoor kitchen repairs and rebuilds in Orlando run 1 – 2 weeks from demo to final clean-up, depending on scope and weather. A full indoor kitchen remodel runs 4 – 8 weeks. We’ll give you an arrival window in writing before the job starts, and we stick to it.
We don’t warehouse Techo-Bloc inventory, but we order directly from authorized distributors and have the common series matching within days. For Stone, Blu 60, and Blu 80 lines, we can typically source exact-match replacements in under a week. Bring us a photo with a ruler for reference and we’ll confirm the series and thickness on our first visit. Call (850) 427-6454 to schedule a free estimate.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.


