Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Orlando Owner’s Guide
If you have Belgard hardscape products tied into your kitchen remodel in Orlando, the most common failure point is the surface material around the cooking zone – think Belgard pavers or wall block used as a kitchen backsplash, island base, or outdoor kitchen transition flooring. This page covers what fails, what it costs to fix or replace, and how we handle the work. In Orlando, a Belgard-integrated kitchen remodel runs $14,000 – $45,000 depending on layout, cabinet line, countertop material, and how much Belgard hardscape is in the design. If the Belgard portion of your kitchen is cracking, shifting, or pulling away, we can usually assess it the same day you call.
Most Orlando homeowners discover a Belgard issue the same way: they notice a hairline crack in a paver behind the range, or a wall block that has shifted out of line against the kitchen island. Sometimes it’s a slower sign – grout or polymeric sand washing out after a heavy summer storm, or a Belgard surface that has started to hold water where it used to drain. By the time we’re called, the part has usually been failing for months, often because the substrate (the base layer beneath the Belgard product) was never compacted or sloped correctly by the original installer.
Which Belgard Models This Applies To
Belgard makes a wide range of pavers, wall blocks, and outdoor kitchen modules, and the compatibility details matter more than most homeowners expect. The paver lines we see most often in Orlando kitchens include the Catalina, Mega-Arbel, and Urbana series, along with Belgard’s Modular wall block used as kitchen island surround. Each series has slightly different thicknesses and joint profiles. A Catalina paver is typically 60mm thick, while Mega-Arbel runs 80mm, and that difference changes how the base needs to be compacted and how much sand or mortar the installer should use. If a previous contractor mixed series on the same surface, the height difference alone can cause the lippage (one paver sitting proud of its neighbor) that eventually cracks edges and catches feet.
On the OEM-versus-aftermarket question: Belgard sells direct through authorized dealers in the Orlando market, and genuine Belgard product carries the brand’s own warranty. Aftermarket pavers that look close in color are almost never a true match after a year of Florida sun, because the pigment load and manufacturing process differ. We recommend genuine Belgard when the surface is visible and the homeowner wants the color and texture to match the rest of the kitchen. If the failed piece is hidden – say, under a cabinet toe-kick or behind an appliance – a quality aftermarket block that matches dimensions can save money without visible compromise. We’ll show you both options and the written price for each before any work starts.
Styles & brands we work with
Signs Your Belgard Kitchen Remodeling Is Failing
- Cracks running in a line across multiple pavers. This usually points to a settling substrate beneath the surface, not a bad paver. The base layer was likely under-compacted, and as it settles, the pavers crack along the stress line. The fix is pulling the section, re-compacting the base, and relaying the pavers – not just swapping the cracked pieces.
- Joint sand washing out after every rain. Orlando’s summer downpours will strip polymeric sand from Belgard joints if the sand was never properly activated or if the joints are too wide. Left alone, pavers start shifting and edges chip. Re-sanding with the right joint compound slows this down for years.
- Wall block leaning or pulling away from the island base. This is almost always a missing or inadequate footing under the first course of block. Once the block leans past about a quarter inch per foot, it needs to be disassembled and rebuilt, not pushed back into place.
- A paver that rocks underfoot near the sink or range. Rocking means the base directly under that paver has a void. It may feel minor, but every time you stand on it, the edges grind against neighbors and the void grows.
- Efflorescence or white staining that keeps returning. That white powder is salts migrating through the paver from trapped moisture. In a kitchen, trapped moisture behind Belgard pavers can also mean the substrate was never sloped away from the house, and water is pooling behind the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Belgard-specific kitchen remodel in Orlando, expect the full project to land between $14,000 and $45,000. When the Belgard portion is the focus – say, replacing a failed paver island base or redoing a Belgard backsplash – the hardscape work typically falls between $3,500 and $11,000 depending on square footage, access, and whether the substrate needs rebuilding. Countertop installation involving Belgard surfaces runs $2,000 – $6,500, and a full kitchen remodel with Belgard elements starts around the $14,000 mark for smaller Orlando kitchens and climbs from there.
Every quote from us includes the same line items, in writing: the Belgard product cost, base material, demolition and haul-away of the failed surface, labor, and the 365-Day Done Right Promise. That means if the replacement shifts, cracks, or fails inside a year, we return and fix it at no charge. No trip fee, no re-inspection cost. The number we hand you before work starts is the number on the final invoice.
DIY or Call Us?
You can safely check a few things yourself: note where cracks run, whether pavers rock, and whether joint sand is washing out. Mark the area with painter’s tape and snap a photo so we can see the pattern before the visit. What you shouldn’t do is pull and reset Belgard pavers that sit near a kitchen island or counter base. The base layer beneath those pavers is load-bearing, and a poorly re-compacted base will fail again within a year, usually worse than the first time. If the Belgard product is part of a wall or a base supporting anything heavier than foot traffic, let a professional handle the rebuild.
If you’re in Orlando and have a Belgard surface that is failing, call (850) 427-6454. We’ll assess it, give you a written price to fix it, and tell you honestly whether you need a full rebuild or a targeted repair. Give you the number first, then pick up the tool.
FAQs
In Orlando’s climate, a properly installed Belgard paver or wall block surface in a kitchen area should last 20 to 30 years before needing major work, with joint sand replenishment every 3 to 5 years. Florida’s combination of intense UV, heavy summer rain, and occasional ground settling shortens the lifespan of the joint material more than the Belgard product itself. Call (850) 427-6454 if your surface is failing sooner – the issue is usually the installation, not the paver.
Yes, in many cases a cracked or rocking Belgard paver can be pulled and reset without replacing the entire surface. If the substrate below is still sound, we reset the paver in fresh bedding material. If the base has settled or washed out, replacement of the section is the honest fix, because resetting pavers on a bad base guarantees the same failure returns. Either way, you’ll know the written price before we start.
A small section repair – pulling and resetting a few pavers or rebuilding a short run of wall block – is usually done in one day. A full kitchen remodel with Belgard elements typically takes 3 to 6 weeks depending on the cabinet line, countertop fabrication schedule, and how much hardscape has to be rebuilt. We’ll give you a schedule and a real arrival window before work begins.
We keep a limited stock of common Belgard paver and wall block styles on hand and order the rest through Belgard’s Orlando-area authorized dealers, which means genuine product arrives in 3 to 10 days for most series. We also work with KraftMaid and Wellborn cabinetry, and Cambria and Silestone countertops, when the kitchen remodel involves more than the Belgard surface. If you need a specific Belgard series matched, call (850) 427-6454 with the name on your original paperwork and we’ll confirm availability and lead time.
If your Belgard kitchen surface is failing in Orlando, call (850) 427-6454 to schedule a free estimate. We’ll assess the damage, write you a firm price, and stand behind the work for a full year – in writing.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
