Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Orlando Owner’s Guide
Ameristar kitchen remodeling in Orlando typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and whether we’re moving plumbing or electrical. Most Orlando homeowners call us after a cabinet hinge has torn out, a drawer slide has bent, or a countertop seam has separated near the sink. You’re not necessarily looking at a full gut job. Often the fix is replacing the failed component and matching it to your existing Ameristar cabinetry so the kitchen looks like nothing ever happened.
Which Ameristar Models This Applies To
Ameristar cabinetry shows up in a lot of Orlando kitchens built between roughly 2003 and 2018, most often through builder-grade installs in neighborhoods like Waterford Lakes, Hunter’s Creek, and Lake Nona. The quickest way to identify your Ameristar series is to open a cabinet door and look for a sticker on the inside of the hinge-side stile. It’ll usually carry a series code like AS-2000, AS-5000, or the later AS-Elite line. The number matters because Ameristar changed its hinge boring pattern between the AS-2000 and AS-5000 series – older doors use a 35mm cup hinge, newer ones use a 40mm cup. We’ve had Orlando homeowners buy replacement hinges online only to find they don’t seat properly. That’s the kind of detail we check before ordering anything.
For most Ameristar parts, we recommend OEM-compatible replacements over generic big-box hardware. The drawer slide lengths (18-inch versus 22-inch) and the cabinet box depths (12-inch versus 24-inch) are matched to Ameristar’s specific tolerances. A universal slide will sag within six months. We also keep common Ameristar hinge styles, soft-close adapters, and drawer glides on our trucks, so if you’re dealing with one failed drawer or a run of loose doors, we can often fix it same-visit.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- A drawer that scrapes or sticks on one side. This usually means a slide has bent or a roller bearing has seized. In Orlando’s humidity, the metal slides on Ameristar boxes can corrode faster than expected, especially under a sink cabinet where condensation collects.
- A cabinet door that won’t stay closed. Ameristar hinges use a spring mechanism that weakens over years of use. When the spring loses tension, the door drifts open. This is a $12 to $25 part, and it’s one of the most common Ameristar repairs we do in Orlando.
- A countertop seam that’s opened up near the sink. Laminate and even quartz seams fail when water sits against them repeatedly. We see this a lot in Orlando kitchens where the original installer didn’t seal the seam with a waterproof adhesive. Left alone, water gets under the laminate and the substrate swells.
- A soft-close drawer that slams now. Ameristar soft-close mechanisms are piston-based. When the piston seal wears, the drawer closes hard. It’s a small part, but replacing it takes the right piston length and mount style for your series.
- Hinges pulling out of the cabinet frame. This is the one we see most after a previous contractor used the wrong screw length. Ameristar frames are 3/4-inch plywood on the AS-5000 series. A 1/2-inch screw doesn’t grab. When the hinge tears out, the repair needs a threaded insert or a new hinge location.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re replacing failed Ameristar components – hinge sets, drawer glides, soft-close mechanisms, or a section of countertop – you’re usually looking at $200 to $1,800 installed. A full Ameristar kitchen remodel in Orlando runs $14,000 to $45,000, with the biggest cost drivers being whether we’re reusing the existing cabinet boxes or pulling everything, plus your countertop choice. Cambria or Silestone runs higher than laminate by a wide margin. Every quote we give is a written, line-item price before any work starts. That number doesn’t change at the door. And every repair or replacement carries our 365-Day Done Right Promise: if it fails inside the guarantee period, we come back and fix it at no charge, covered in writing.
DIY or Call Us?
You can safely tighten a loose hinge screw or wipe down a sticky glide. What you shouldn’t do is pull apart a soft-close piston or try to re-bore a hinge cup without the right jig. We’ve walked into Orlando kitchens where a homeowner drilled through the face of a cabinet door trying to re-align a hinge. At that point, the $20 hinge becomes a $140 replacement door. If the part involves a countertop seam, that’s another one to leave alone. Separating a failed seam without the right solvent damages the surrounding material. For anything beyond a screwdriver tightening, call (850) 427-6454 and we’ll tell you over the phone whether it’s worth a service visit or a parts-only swap.
FAQs
You can expect 15 to 25 years from Ameristar cabinet boxes in Orlando, assuming the kitchen has decent ventilation and you keep water away from the base cabinets. The weak points are usually the moving parts – hinges, slides, and soft-close pistons – which fail long before the boxes do. If your boxes are solid, replacing the hardware gets you another decade. Call (850) 427-6454 and we’ll tell you if your boxes are worth saving.
Most Ameristar cabinet failures are repairable. Torn-out hinges, bent slides, failed soft-close mechanisms, and even delaminating edge banding can all be fixed without pulling the cabinets. We only recommend replacement when the box itself has water damage or the frame is cracked. Call (850) 427-6454 for an honest assessment – estimates are free.
A hinge or slide swap usually takes one to two hours on-site, assuming we have the part on the truck. Special-order Ameristar parts add three to seven business days. A countertop seam repair can run half a day because the adhesive needs curing time. Call (850) 427-6454 and we’ll give you a real time frame, not a vague “soon.”
We keep common Ameristar hinge styles, drawer slides, soft-close adapters, and door bumpers on our service trucks. For series-specific parts – AS-Elite hinges or odd drawer slide lengths – we order OEM-compatible replacements and have them in hand before we schedule your visit. We also work with KraftMaid, Cambria, and Silestone parts, so if your kitchen mixed brands, we can likely handle the whole repair in one trip.
If your Ameristar kitchen is giving you trouble, call (850) 427-6454. You’ll get a real person on the phone, a straight answer about what’s failing, and a written price before we pick up a single tool. Give you the number first, then pick up the tool.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
