A Penhallow company - serving Orlando, FL
An open living room and dining area after a whole-home remodel

ECO Window Systems Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Orlando
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

ECO Window Systems Windows & Doors: The Orlando Owner’s Guide

Most ECO Window Systems windows and doors we service in Orlando need a replacement part rather than a full unit swap, and the installed cost usually lands between $250 and $900 depending on the component. We keep common ECO Window Systems hardware on our trucks: balances, tilt latches, weatherstripping, rollers, and multi-point lock assemblies. The typical discovery moment is a sash that drops an inch when you let go, or a door that suddenly needs two hands to close. In Orlando, the heat and humidity do specific things to these parts: vinyl expands and contracts daily, aluminum gets pitted by salt air if you’re anywhere near the coast, and the gaskets that should seal out summer moisture harden and crack faster than the manufacturer’s average. You’ll usually notice it as a window that leaks warm air, a lock that doesn’t catch, or a door that scrapes the frame only in August.

Two contractors installing custom upper kitchen cabinets during a home remodel nationwide

Call (850) 427-6454

Key Takeaways

  • We stock common ECO Window Systems replacement parts on the truck for same-visit swaps in Orlando.
  • Installed prices typically run $250 – $900 per part, with a written quote before we start.
  • Most failures are in the lock channel, balance system, or weatherstripping, not the glass or frame itself.
  • Every repair carries our 365-Day Done Right Promise, in writing.

Which ECO Window Systems Models This Applies To

An open living space after a whole-home remodel

ECO Window Systems builds a few distinct product lines, and the part you need depends on which one is in your house. The ECO 3000 and ECO 4000 series are the most common in Orlando, and they don’t share all hardware. The 3000 series uses a 3/4-inch balance shoe that sits inside a narrow jamb channel, while the 4000 series moved to a wider 1-inch shoe. The quickest way to identify yours: open the sash and look for a silver or white sticker on the jamb (the vertical track the window rides in). It’ll list the series, the build date, and a production code. No sticker? Measure the width of that jamb channel. 3/4 inch means 3000 series. 1 inch means 4000. This matters because a 3000-series balance shoe won’t seat correctly in a 4000-series channel, and forcing it is how homeowners round out the channel and turn a $40 part into a $300 jamb replacement. On the door side, ECO’s sliding glass doors use a tandem roller assembly that changed in 2019, and the older single-wheel rollers are no longer made. We carry the new tandem style and machine an adapter plate for older frames rather than telling you to replace the whole door, which rarely makes sense for a functioning panel.

For OEM versus aftermarket: ECO Window Systems still distributes OEM parts through their dealer network, but lead times in Orlando run two to four weeks for anything not sitting in a local warehouse. Quality aftermarket equivalents (we use a supplier out of Tampa) match the OEM spec for balances and weatherstripping at roughly 60% of the OEM price. For lock assemblies and multi-point mechanisms, we stick with OEM. Those parts are sensitive to small tolerance differences, and a lock that fits “close enough” is a lock that fails again in eleven months.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your ECO Window Systems Windows & Doors Is Failing

  • Sash drops when you release it. The balance system is shot. ECO’s balances use a coiled metal spring inside a vinyl shoe, and when that shoe cracks (common in Orlando heat), the sash loses tension and won’t stay up. It’s not the glass, it’s the part inside the jamb.
  • Window won’t stay tilted for cleaning, or tilts on its own. The tilt latches are worn or one side has snapped. ECO tilt latches are side-mounted and taper over time, so the sash drifts out of the track. If you notice one corner sitting proud of the frame, the latch is already failing and the sash is one aggressive opening away from popping out.
  • Humid air seeping around closed windows in summer. The weatherstripping has compressed and hardened. Orlando’s wet season exposes this fast: your AC works harder, and you may see condensation on the interior glass in July. The gasket material ECO used on pre-2018 units doesn’t hold its shape well after six or seven Florida summers.
  • Lock lever turns but doesn’t throw the deadbolt. The multi-point lock tie bar has bent or snapped. This is common on ECO swing doors in homes with heavy settling, and it’s a security issue you shouldn’t ignore. The tie bar is an OEM part we replace on site.
  • Sliding door grinds or stalls when you roll it. The rollers have flattened or the bearings seized. Orlando’s humidity accelerates rust inside the roller housing, especially in pool-facing doors. Once a roller starts grinding, the grit it throws grits up the track, and you’re now also looking at track wear.

Replacement Cost & What’s Included

A remodeled living room with built-in shelves around the fireplace

Real numbers for ECO Window Systems window and door parts in Orlando, installed:

Part Typical Installed Price (Orlando)
Window sash balance (single, 3000 or 4000 series) $125 – $260
Tilt latch pair (per sash) $85 – $180
Weatherstripping (full window, all sides) $90 – $210
Multi-point door lock assembly (OEM) $320 – $650
Sliding glass door roller assembly (per panel) $160 – $340
Complete hardware refresh (one window) $250 – $500

What drives the range: the series (4000-series parts run about 15 to 20 percent more than 3000-series), whether we’re in an OEM or good aftermarket part, and how far into the jamb the old component has seated itself. Every number above includes the part, the labor, and the disposal of the failed piece. If the part is already on the truck, the price on the written quote is the price on the invoice. No trip charge for the initial diagnosis, and no surprise line items once we open the wall. Every repair carries our 365-Day Done Right Promise: if the part fails inside a year, we return and make it right at no charge, in writing. That’s the Kingswell way, and it’s been that way since 2004.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things you can safely check yourself before calling. Confirm the sash sticker and series number. Check whether both tilt latches depress evenly. Lube a sticky sliding door track with a dry silicone spray and see if that changes the feel. Those are honest diagnostics that help us show up with the right part. What you shouldn’t do: you shouldn’t try to pull the balance shoe out of the jamb channel. That shoe is under spring tension, and when it lets go, it lets go against fingers, knuckles, and window frames. Same goes for the multi-point door lock tie bar; you’re working inside a drilled stile, the rod is under load, and misreading the travel pattern is an easy way to turn a $300 lock replacement into a door slab replacement. If the window has dropped and won’t stay up, tape it closed with painter’s tape and call us. We have the balances on the truck for most ECO series windows in Orlando, and the phone at (850) 427-6454 is answered by a person. Not a menu, not a voicemail. Give you the number first, then pick up the tool.

Two contractors installing custom upper kitchen cabinets during a home remodel nationwide

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Call for a Straight Answer and a Written Price

Before you decide anything, call (850) 427-6454. Tell us what your ECO Window Systems window or door is doing, and we’ll give you a real price range over the phone, then schedule a visit to confirm it in writing on site. No obligation, no pressure, no estimate ranges that balloon later. We also carry replacement hardware for many of the other brands in Orlando homes: KraftMaid cabinetry, Cambria and Silestone countertops. If one problem turned out to be another, we’ll tell you that too. I’m Trevor Nash, and the standard here is simple: the number on the written quote is the number on the invoice, and if the work fails inside a year, we’re back to make it right at no charge.

Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.

Getting started with Penhallow in Orlando

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Orlando team

A local crew that works across Orlando and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orlando? Licensed & insured · Free written quotes response · free estimates
Call (850) 427-6454
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Penhallow Remodeling Orlando responds fast. No obligation.

By clicking submit, you agree to our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch