Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Orlando Owner’s Guide
We replace and renovate CWS bathroom remodels throughout Orlando, and a full CWS bathroom remodel typically runs $9,000 – $28,000 depending on the size of the space, the condition of what’s underneath, and the materials you choose. Most CWS owners call us when a single point of failure appears: cracked shower pans, leaking valve bodies, failing grout seams, or vanity cabinet frames that have swollen at the base from years of Florida humidity. The good news is that a failing component often doesn’t mean tearing out everything. We match what’s salvageable, replace what isn’t, and give you a written price before any tools come off the truck.
Key Takeaways:
- A CWS bathroom remodel in Orlando runs $9,000 – $28,000 installed.
- We carry and order OEM-spec CWS parts, plus quality equivalents from Kohler, Moen, Delta, and Toto.
- Penhallow Remodeling Orlando is an independent remodeler, not affiliated with CWS.
- Every job gets a written price first, a 365-Day Done Right Promise, and a real arrival window.
Which CWS Models This Applies To
CWS built bathrooms across several line series over the years, and parts compatibility depends more on the plumbing and cabinet spec than the name on the door. The most common configurations we see in Orlando homes are the CWS Standard Series (36-inch vanities, alcove tubs with 60-inch surrounds) and the CWS Deluxe Series (48- to 60-inch double vanities, walk-in showers with 12×24 wall tile and quartz or cultured marble tops). The plumbing fixtures are typically sourced from major manufacturers, Kohler and Moen being the most frequent, which means replacement cartridges, trim kits, and valve bodies are generally available to us locally or within a few days.
One compatibility gotcha we run into regularly: CWS shower valves in some Deluxe Series units use a non-standard rough-in depth. If the wall was furred out differently during the original install, a stock replacement trim kit won’t seat correctly. We measure the rough-in before ordering, because the last thing you want is a new trim kit that sits proud of the tile by a quarter inch. It’s a small detail that matters when you’re looking at it every morning. On the cabinet side, CWS used a mix of framed and frameless construction depending on the year. Older framed boxes take standard 35mm concealed hinges, but some of the drawer glide mounts are euro-spec and will not accept big-box replacements without a small adapter plate. We keep those plates on the truck, because it’s a $6 fix that saves a drawer from sitting crooked forever.
The OEM-versus-aftermarket decision for CWS is straightforward. For valves and cartridges, we use OEM-spec parts, because water under pressure is not where you save forty bucks. For cabinet hardware, door hinges, and drawer glides, quality aftermarket equivalents from Blum and Salice often outlast the original CWS-spec hardware. We’ll tell you which is which and why, and the written quote will show exactly what you’re paying for.
Styles & brands we work with
Signs Your CWS Bathroom Remodeling Is Failing
- Water stains on the ceiling below the bathroom. This usually means a slow leak at the shower pan or tub drain flange. The stain shows up weeks after the leak starts, so by the time you see it, the subfloor has been wet longer than you’d hope. We cut out the affected section, check the joists, and replace what’s compromised.
- Grout that keeps cracking in the same seams. CWS showers over wood-framed floors move. Orlando’s clay-heavy soil shrinks and swells with the wet and dry seasons, and that movement telegraphs up through the walls. Cracked grout isn’t just cosmetic, it’s an open path for water into the wall cavity. We use a flexible sealant at all change-of-plane joints when we remodel, something the original CWS install often skipped.
- A shower valve that drips or won’t hold temperature. The cartridge inside the valve body is a wear item, and Orlando’s hard water accelerates the process. Hard water deposits inside the cartridge cause a constant trickle or temperature swings while you’re showering. We stock the common cartridges for CWS-spec Kohler and Moen valves on the truck.
- Vanity cabinet doors that won’t stay closed or drawers that sag. Florida humidity is rough on particleboard and MDF. We see CWS vanity frames swell at the bottom corners where bathroom floors get mopped. Once the substrate swells, the hinge screws lose their bite. Sometimes a hinge replacement does it; sometimes the box needs rebuilding or replacement.
- Soft spots in the floor around the toilet or tub apron. That’s a structural warning, not a surface issue. By the time vinyl or tile feels spongy underfoot, the subfloor below has absorbed a lot of moisture. We pull the fixture, replace the rotted section, and confirm the framing is solid before reinstalling anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, a CWS bathroom remodel carries an installed range of $9,000 – $28,000. The spread is wide because the condition of what’s behind the surfaces drives the number as much as the finishes you choose. Here’s how the range breaks down in practice:
- Partial refresh (new fixtures, vanity top, hardware, resealed shower): $5,000 – $12,000
- Full standard bathroom remodel (new tub or shower, vanity, tile, fixtures, paint): $9,000 – $18,000
- Full deluxe remodel (walk-in shower conversion, double vanity, quartz tops, custom tile work): $18,000 – $28,000
Everything we quote includes parts and labor, demolition, debris hauling, permits when required, and the written 365-Day Done Right Promise. If a repair fails inside the guarantee period, we come back and fix it at no charge. No service call fee, no re-inspection fee. The number on day one is the number on the invoice. That’s the Kingswell Way, and we’ve operated under it since 2004.
DIY or Call Us?
You can safely handle a few things yourself: tightening loose cabinet hinge screws, resealing a shower door drip rail, or replacing a worn toilet flapper. Those are five-minute jobs with low stakes. But when you’re dealing with a CWS shower valve, a leaking pan, or anything that involves cutting into finished walls, we’d recommend a trained professional. Water damage inside a wall cavity doesn’t announce itself, and by the time you see mold on the surface, the framing underneath has been wet a long time. Our technicians are background-checked, uniformed, and they show up in the window we gave you. Trevor Nash built this company on a simple idea: give you the number first, then pick up the tool. Call (850) 427-6454 and we’ll walk through what’s failing, what it costs, and exactly what we’d do about it.
FAQs
A properly installed CWS bathroom remodel should last 15 – 20 years before major components need attention, though Florida humidity and hard water shorten the life of cartridges, grout, and cabinet hardware to around 8 – 12 years. We also work with parts from KraftMaid, Cambria, and Silestone when homeowners want to upgrade beyond the original CWS spec. Call (850) 427-6454 for a free estimate and we’ll tell you honestly what’s worth fixing and what’s worth replacing.
In most cases, no. Hairline cracks in a CWS acrylic or cultured marble pan can sometimes be patched, but the patch is temporary and the underlying flex that caused the crack remains. The repair that lasts is a pan replacement with proper mortar bed support underneath. Call (850) 427-6454 and we’ll inspect yours before recommending anything.
A standard CWS bathroom remodel in Orlando runs 2 – 4 weeks from demolition to final walkthrough, depending on what we find behind the walls and how the materials schedule lines up. We give you a written start window before the job begins, and we stick to it. Call (850) 427-6454 for a timeline based on your specific scope.
We carry common CWS-spec replacement parts on the truck: valve cartridges, trim kits, cabinet hinges, drawer glides, and drain assemblies. Anything outside our standard inventory we source through our trade suppliers within a few days, and we handle the ordering, the delivery, and any wrong-part returns so you don’t have to. Call (850) 427-6454 and we’ll check availability while you’re on the phone.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
