Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Orlando Owner’s Guide
A full PGT bathroom remodel in Orlando typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a tired shower surround or rebuilding the room to the studs. We stock PGT-compatible shower glass, enclosure hardware, and related waterproofing materials on our trucks so most replacements start the same week you call. Most Orlando homeowners discover their PGT bathroom components have failed the hard way: a shower door that no longer seals, a hinge that’s gone wobbly, or an enclosure frame that’s started pulling away from the wall. We’re an independent Orlando remodeling company, not affiliated with PGT, but we’ve worked with their product lines long enough to know exactly what fails and what it takes to make it right.
Which PGT Models This Applies To
PGT’s bathroom product lines fall into two broad camps: their shower enclosure systems and their impact-rated windows that often show up in Orlando bathrooms with exterior walls. Shower enclosures are the more common bathroom-specific item, and they come in framed, semi-frameless, and fully frameless configurations. The compatibility gotcha most homeowners don’t know: PGT shower enclosures are cut to spec at the factory, which means a replacement panel for a 2005-era framed unit won’t simply drop into a 2019 semi-frameless track. Measurements matter, and they’re the first thing Trevor Nash asks about when we quote a replacement.
Before calling any contractor, look for the PGT label. On shower enclosures, it’s usually etched near a lower corner of the glass or stamped on the header rail. On PGT windows, you’ll find it on the frame stile, along with the model number and a manufacturing date code. That code tells us which era of PGT manufacturing we’re dealing with, which matters because PGT changed their hinge geometry and glass thickness standards over the years. For shower enclosures, the key measurement is the wall-to-wall opening width, not the glass panel width. Many Orlando homeowners buy a replacement panel based on the old glass measurement and discover during install that the new panel leaves a 3/8-inch gap. We always measure the opening, the out-of-square, and the existing hardware pattern before recommending either a PGT OEM replacement or a quality aftermarket equivalent.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Shower door won’t stay closed or drifts open. This points to worn hinge cams or a frame that’s shifted out of square. In Orlando’s humidity, metal hinges expand and contract with seasonal changes, and eventually the tension mechanism loses grip.
- Water pooling outside the shower curb after every use. The weep slots in the bottom track are likely clogged with mineral buildup from Orlando’s hard water, or the vinyl sweep under the door has hardened and cracked. Both are inexpensive parts, but left too long, the track itself starts corroding.
- Cloudy or hazy glass that no amount of cleaning fixes. PGT enclosures use tempered glass with a factory-applied protective coating. Once that coating breaks down from abrasive cleaners or a decade of hard Orlando water, the glass starts etching permanently. You can’t polish it back, and replacement is the only fix.
- Frame pulling away from the tile at the top corners. The wall anchors have loosened, usually because the original installer hit drywall instead of a stud or the tile settles. This is a warning sign: a full glass panel is heavy, and a loose anchor is a safety issue, not just a leak.
- Creaking or popping sounds from the glass when the door moves. Tempered glass is under internal stress, and once it starts making noise against its hardware, it’s a sign the panels are binding. We’ve replaced more than a few PGT enclosures in College Park bungalows where the house shifted just enough that the original glass no longer fit its opening cleanly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A PGT bathroom remodel in Orlando carries a wide range because the scope varies that much. A straightforward shower enclosure replacement, reusing existing plumbing and tile, lands between $4,500 and $12,000. A full bathroom gut with new PGT-compatible glass, waterproofing, tile, vanity, and fixtures pushes into the $9,000 to $28,000 range. What moves the number: whether we’re pulling up tile and replacing the cement board substrate (the moisture-resistant layer behind your tile), whether plumbing fixtures stay in place or move, and what materials you choose for the finish work.
Every quote includes the parts, labor, haul-away, and a written breakdown of all three. We source from recognized trade brands like Kohler and Moen for fixtures and Cambria or Silestone if you’re adding solid surface countertops. The PGT glass itself, when we install a factory replacement, carries its own manufacturer coverage alongside our 365-Day Done Right Promise. If something in our work fails inside the guarantee period, we come back and fix it at no charge. That’s in writing on every project, not a verbal handshake.
DIY or Call Us?
I’ll be straight with you as someone who grew up outside Los Angeles and learned framing and finish work at Trade-Tech before spending two decades on job sites. Some of this is safe to check yourself. You can inspect the bottom track for debris, test whether the door swing feels loose in your hand, and look for water stains around the frame. Those observations help you speak the same language as the contractor.
What you shouldn’t do is pull PGT tempered glass off its hinges or try to re-anchor a frame yourself. Tempered glass doesn’t crack gently. It explodes into thousands of small cubes when it fails, and a 70-pound shower door dropping on a bathroom floor is an injury risk and a mess you don’t want. If your PGT enclosure is pulling from the wall or the glass is binding, call (850) 427-6454 and let us look at it. Estimates are free, and we’ll give you the number first, then pick up the tool.
FAQs
Framed PGT enclosures typically last 12 to 18 years in Orlando before the metal corrodes or glass coating fails, while frameless panels can last 20-plus years with care. The humidity and hard water here shorten the life of hardware seals faster than in drier climates, so we generally tell homeowners with 15-year-old units to start budgeting for replacement rather than another patch. Call (850) 427-6454 if you want an honest assessment of the remaining life in your enclosure.
Yes, if the failure is limited to hardware like hinges, sweeps, or track seals. If the glass itself is etched or the frame is corroded through, replacement is the more economical choice over time. We stock common PGT-compatible hinge sets and seals on our trucks, so a hardware-only fix is often done in one visit. Call (850) 427-6454 and describe what you’re seeing, and we’ll tell you which path makes sense before we come out.
Most bathroom enclosure replacements are done in one to two days, depending on whether we discover damage to the substrate behind the old track. If we’re doing a full bathroom remodel with tile and plumbing work, the job runs one to three weeks. We give you a written schedule with a defined arrival window before work starts, so you’re not guessing when the crew shows up.
We stock common PGT-compatible hardware including hinge sets, door sweeps, track seals, and wall anchors on our service trucks. Full glass panels are cut to order because they’re made to your exact opening dimensions. We also work with KraftMaid, Cambria, and Silestone products for bathroom remodels that include cabinetry or countertops. Call (850) 427-6454 with your PGT label information and we’ll tell you whether the part you need is something we carry or something we order before the install day.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
