Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Orlando Owner’s Guide
We replace and install IKO-compatible windows and doors for Orlando homeowners, with full window replacement typically running $4,500–$15,000 depending on how many openings and what level of impact rating you need. If you have a failed sash, a warped frame, or a seal that gave up in the humidity, we can usually match the IKO series on the first visit and get the part ordered or installed quickly.
Most homeowners discover a failed IKO part the same way: a window that will not lock, a door that drags against the frame every afternoon, or condensation that sits stubbornly between the panes no matter what the thermostat says. Something changes in the daily routine and suddenly the house does not close like it used to. If that sounds like the last few weeks at your place, we can tell you exactly what failed, what a fix costs, and whether the rest of the unit is worth keeping.
Which IKO Models This Applies To
IKO manufactures vinyl and aluminum window and door systems across several North American series lines, and the parts are not as interchangeable as they look in a catalog. The balance shoe from one series will not always seat in the spiral balance tube of another, and door sweeps are cut to the profile of the specific sill the factory used that production year. When we order replacement hardware, we always match the series stamp and the glass etching code before anything gets ordered. Guessing by sight is how doors end up with a quarter-inch gap at the threshold.
For OEM versus aftermarket, our rule is simple: moving parts and weather sealing come from IKO or an approved equivalent manufacturer. Cosmetic hardware can come from a quality aftermarket house if the profile matches exactly. Latches, balances, pivot bars, and compression seals are where aftermarket parts fail early in Florida humidity, and saving nine dollars on a seal that rots in eighteen months is not a bargain. Our technicians carry the most common balance shoes, pivot bars, and sash locks on the truck, which means a good share of IKO window repairs in Orlando get done on the first trip.
Styles & brands we work with
Signs Your IKO Windows & Doors Is Failing
- The window closes but will not lock. The sash has likely dropped or the keeper on the frame has moved out of alignment. This usually means a balance shoe has worn down or the hinge plate has slipped. If you have to lift the sash and jiggle it to get the lock to catch, that is the sign.
- The door drags or sticks only in the afternoon. Orlando’s heat expands vinyl and aluminum at different rates, and a door that brushes the frame at 3 p.m. but swings freely at 8 a.m. is binding on its hinges or has a frame that shifted. Left alone, it will chew through the weatherstrip and then the frame itself.
- Condensation between the panes that never clears. The insulated glass unit seal has failed and the desiccant inside the spacer has absorbed all the moisture it can. No amount of wiping or dehumidifying fixes this. The glass unit needs replacement.
- You can feel air moving around a closed window or door. The compression seal is compressed permanently or torn, which is common on units that have baked in the Florida sun for a decade. On a windy afternoon you will feel it at the top corners first.
- The window drops hard when you open it, or slams shut on the way down. One of the balance springs has let go. That sash is now dead weight. Opening and closing it anyway is how fingers and window frames get broken.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For IKO-compatible part swaps in Orlando, a single sash balance or latch repair usually runs $150–$400 installed, depending on parts and access. A full glass unit replacement runs $350–$900 per pane. If the entire window or door is at the end of its life, a whole-unit replacement runs $4,500–$15,000 for a typical Orlando home, and that number shifts with the number of openings, the impact rating, and whether we are pulling an old aluminum frame or working inside an existing vinyl buck.
Every quote is written. The number we give you before the job is the number on your invoice, and it includes parts, labor, haul-away of the old unit if needed, and the workmanship warranty. If the repair fails inside the 365-Day Done Right Promise window, we come back and fix it at no charge. No service call fee, no reinspection fee. That is the Kingswell Way: say the price before the work, show up in the window we gave, leave the job cleaner than we found it.
DIY or Call Us?
Here is the honest split. You can safely check whether the screws on the lock plates are tight, whether the weep holes at the bottom of the frame are clear of dirt, and whether the weatherstrip is torn anywhere you can see. Those are useful things to know before you call, because they help us know what we are walking into.
What you should not do is mess with a spiral balance under tension or try to free a bound sash by forcing it. Those balance tubes hold genuine force under compression, and a spring that lets go while you are working on it will do real damage to hands and fingers. Glass unit replacements are the same story: the tolerances are tight, the shimming matters, and a dropped pane turns into a bigger bill than the original repair. If the problem is in the balance, the hinge, or the sealed glass, call us at (850) 427-6454 and let a background-checked, uniformed technician handle it.
FAQs
We typically see IKO vinyl and aluminum units hold up 15–25 years in Orlando, with the seals and moving hardware failing before the frame does. Humidity is the real killer here, not impact. Units that face west and get full afternoon sun lose their seals faster than shaded units.
Most failed hardware can be repaired: balance shoes, pivot bars, latches, and sweeps are all replaceable parts. The only time we recommend full replacement is when the frame is warped, rotted, or so far out of square that new parts will not seat properly. Call us at (850) 427-6454 and we will tell you which situation you are in before you spend a dollar.
Most hardware swaps take one to two hours on-site. A glass unit replacement usually takes one visit to measure and a second to install, with about a week between them for the glass to be fabricated. We will give you a written schedule before we start.
We stock the most common IKO balance shoes, pivot bars, sash locks, and compression seals on our trucks in Orlando, so a good share of repairs are handled first visit. Specialized parts and custom glass units are ordered and typically arrive within a week. For anything else, we also work with KraftMaid, Cambria, and Silestone components on broader remodeling projects.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
