Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Kitchen Remodeling: The Orlando Owner’s Guide
If you have an IKO product in your kitchen and something’s failed, the fix typically runs between $14,000 and $45,000 for a full IKO-quality kitchen remodel in Orlando. That’s not a part-swap price; that’s the reality of replacing failed cabinetry, countertops, or wall systems with materials built to the same IKO standard. We stock and install IKO-compatible kitchen components, match specifications to your existing configuration, and schedule a written estimate before any work starts.
Most Orlando homeowners discover an IKO-related failure the hard way: a cabinet door that no longer closes square, a countertop seam opening up, or water swelling the substrate (the layer beneath your surface material) after months of Florida humidity. You call because you want to know if it’s a patch job or a pull-it-out job. We’ll tell you straight.
Which IKO Models This Applies To
IKO’s presence in kitchen remodeling spans a few product lines, and compatibility matters more than most people assume. The cabinetry and surfacing components from IKO come in different series designations, and a hinge, drawer glides, or edge-banding profile from one series does not always interchange with another. Check the label inside a drawer box or on the back of a cabinet panel for the series code before you order anything.
For most IKO kitchen failures, you’ll hear two terms: OEM and aftermarket. OEM means the part comes from IKO’s specified manufacturing line. Aftermarket means a third-party equivalent built to match the dimensions. The practical difference in Orlando comes down to this: OEM parts preserve the original fit, but lead times can stretch when a specialized component is backordered. Aftermarket equivalents often arrive faster and cost less, but you need someone who knows which suppliers produce true drop-in matches and which ones sell close-enough parts that bind or gap. We stock common IKO replacement hardware and order OEM when the job demands it.
One compatibility gotcha we see often: IKO door hinges use a specific cup diameter and screw pattern. A hinge that’s 2mm off will sit crooked no matter how carefully you align it. We measure and verify before we install.
Styles & brands we work with
Signs Your IKO Kitchen Remodeling Is Failing
- Cabinet doors drift shut or refuse to stay closed. This usually means hinge fatigue or stripped screws in the cabinet box. In Orlando’s humidity, particleboard screw holes soften and lose grip faster than solid wood or plywood boxes do.
- Drawer glides catch or grind. IKO drawer glides wear unevenly when the drawer face carries extra weight, like a utensil organizer that’s overfilled. The symptom is the first sign the glide’s ball bearings have flattened.
- Countertop seams open or show dark lines near the sink. Florida’s moisture cycle expands and contracts the substrate beneath the surface. A seam gap isn’t cosmetic; it’s water finding a way in.
- Swelling or softness at the toe kick. This is almost always water damage from a dishwasher leak or a sink seal that failed silently. The IKO cabinet box is absorbing moisture from below.
- Laminate or edge banding peeling in one spot. Heat from an oven or dishwasher vent cycle loosens the adhesive bond. It starts small, then spreads along the edge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, an IKO kitchen remodel typically lands between $14,000 and $45,000. What moves the number: the cabinet line, the countertop material, and how much of the existing layout you’re changing. A straight replacement of failed components costs less than reconfiguring the footprint.
Every estimate we write is a written price before the first tool comes out. That number includes parts, labor, haul-away, and the finish work: trim, caulk, alignment, cleanup. If something changes mid-job, you’ll know the reason and the cost before we proceed. The 365-Day Done Right Promise covers the work in writing. If it fails inside that window, we come back and fix it at no charge.
The brand materials matter here too. We install KraftMaid and Wellborn cabinetry, plus Cambria and Silestone countertops. If your IKO components are beyond saving, we’ll spec replacements from those lines so your kitchen isn’t a patchwork of mismatched parts.
DIY or Call Us?
You can safely check the label on your IKO cabinet or component to identify the series. You can photograph the failure and measure the visible face dimensions. That helps us quote accurately over the phone.
But here’s where DIY goes sideways: hinge replacement on a 35-pound door, countertop removal without scoring the adhesive, or reattaching edge banding that lifts the laminate. None of this is dangerous like electrical work, but a wrong move turns a $2,000 repair into a $15,000 replacement. Trevor Nash’s rule applies: we give you the number first, then pick up the tool. Call (850) 427-6454 and we’ll schedule a written estimate.
FAQs
Solid IKO cabinetry and surfacing should give you 15 to 25 years in Orlando, but humidity-driven conditions like dishwashers, ovens, and sink splashes age the lower cabinets and countertop seams faster. Same materials, the upper cabinets often outlive the lowers by five or ten years.
Often, yes. Hinges, glides, edge banding, and seam re-bonding are repairable when caught early. Once particleboard has absorbed water or swollen, replacement is usually cheaper than trying to dry and re-shape it. We’ll tell you which side of that line you’re on during the estimate.
Most Orlando kitchen remodels run two to six weeks depending on scope and material lead times. A cabinet-only replacement typically finishes in a week; a full gut with new layout, countertops, and backsplash will close in on a month or more.
We keep common IKO hardware, hinges, glides, and edge-banding profiles on hand in our Orlando inventory. Specialized or series-specific parts are ordered OEM with the lead time confirmed before you commit to anything. Call (850) 427-6454 and we’ll check what’s in stock.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
