Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Orlando Owner’s Guide
CertainTeed kitchen remodeling in Orlando typically runs $14,000 to $45,000 installed, depending on cabinet configuration, countertop material, and whether you’re addressing a single failed component or a full kitchen overhaul. We match compatible CertainTeed cabinetry and trim components, quote the installed price in writing before any work starts, and often complete the swap the same week parts arrive. Most Orlando homeowners call us after finding a delaminated cabinet door, a wall oven surround that has swollen from sink-side humidity, or a post-and-rail molding line that no longer snaps together the way it did when the kitchen was first installed.
If you’re holding a cracked cabinet shelf, a water-stained vanity base, or a drawer front that separated from its slab, you already know the part that failed. What you need is the right replacement matched to your CertainTeed series and a contractor in Orlando who will write the price down before anyone touches the cabinet. That is exactly what we do here at Penhallow Remodeling.
Which CertainTeed Models This Applies To
CertainTeed cabinetry comes in a few distinct construction lines, and the compatibility details matter more than most homeowners expect. The most common lines we see in Orlando kitchens are the thermofoil-wrapped doors, which carry a smooth PVC skin over an MDF core, and the stain-grade wood doors with a catalyzed conversion varnish. These are not interchangeable, even when the door size is identical. The thermofoil line uses a 5-piece door profile with a different hinge boring pattern than the wood line, so a replacement door from the wrong series will not seat correctly on your existing face frames.
Here is the compatibility gotcha we run into weekly in Orlando: CertainTeed’s drawer box sizes run in 3-inch height increments, but the glide hardware is paired to the specific box height. If you’re replacing a damaged drawer box but keeping the original metal glides, the replacement has to match not just the width and depth but the box height. An off-shelf box that is 1/2 inch shorter means the drawer sits low in the opening and catches on the face frame. We measure before we order, every time.
For OEM versus aftermarket: CertainTeed’s in-house door lines are still available for many series through our trade suppliers, and the factory finish matches better than any aftermarket refinish we have tried. That said, for discontinued CertainTeed patterns, a well-built aftermarket door from a local millwork shop, sprayed to a measured sheen match, is often the better value than waiting on backorder. We will lay out both options with real numbers and let you decide.
Styles & brands we work with
Signs Your CertainTeed Kitchen Remodeling Is Failing
- Thermofoil is peeling or bubbling at the bottom corners of cabinet doors. Orlando’s humidity, especially in homes near Lake Eola or Baldwin Park with older HVAC, pushes moisture behind the vinyl skin. Once it lifts at the seam, the MDF core below starts to swell, and the door will not recover. Replacement is the fix, not regluing.
- Drawer fronts have developed a hairline crack running from the screw hole outward. This usually happens when the previous installer overshot the drawer-front screws or used a driver without a clutch. The crack spreads because the screw keeps working under the weight of the drawer contents.
- The wall oven or dishwasher surround panel shows water staining or a chalky bloom along the bottom edge. Steam from the dishwasher vent, repeated over years, breaks down the finish and swells the substrate, the engineered wood panel behind the surface. A stained surround is often a sign the dishwasher door gasket is also worth a look.
- Cabinet doors no longer sit square in the opening, and the soft-close hinge keeps slipping. The hinge plate screws in the face frame have stripped. The fix is not longer screws; it is a threaded insert or a hinge plate repair bracket, then the door gets rehung to the face frame.
- The toekick, or the recessed board at the bottom front of your base cabinets, is swollen and soft at the edge. This comes from repeated mopping with a wet mop. In Orlando’s climate, the toekick can stay damp for hours, and that is enough to break down the melamine edge banding.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CertainTeed kitchen remodel in Orlando runs $14,000 to $45,000. That is the range for a mid-size Orlando kitchen, roughly 120 to 200 square feet, with slab or Shaker doors, new cabinet boxes where needed, soft-close hardware, and either laminate or entry-level quartz counters. A smaller galley kitchen or a kitchenette in a Dr. Phillips condo can land around $9,000 to $20,000. If you are replacing just the failed parts, cabinet doors and drawer fronts, a single run of cabinets, one damaged surround panel, the job typically falls between $4,000 and $13,000, depending on how many pieces are involved and whether the boxes behind them are still sound.
What drives the number up or down: cabinet line (stock versus semi-custom), countertop material (laminate starts lower, Cambria or Silestone quartz pushes the top end), whether the existing cabinet boxes can be kept, and how much electrical or plumbing repositioning the layout requires. Every quote includes the parts, labor, haul-off of the old material, and a written line-item price. We do not hand out verbal ballparks. You get the number in writing before the first tool comes off the truck.
Every CertainTeed kitchen remodel we install in Orlando comes with our 365-Day Done Right Promise in writing: if something fails inside the guarantee period, we come back and fix it at no charge. If a repair fails, the second visit is free, no service call, no re-inspection fee. We install materials from recognized trade brands, so the product warranties sit on top of our workmanship promise, not in place of it.
DIY or Call Us?
You can safely check a few things yourself. Confirm the hinge is not just loose at the mounting plate; check whether the drawer glide is clipped properly onto the cabinet member; look for a visible moisture source behind the failing panel. Those are diagnostic steps, and they cost nothing.
Where DIY goes wrong with CertainTeed parts is in the fit-up. These cabinets are built with a face-frame system, and replacement doors hang on specific overlay dimensions. Order a door 1/4 inch off, and it will catch on the adjacent door. Order thermofoil when you need the wood line, and the hinge boring will be wrong. Add in the risk of splitting a face frame while driving screws without a pilot hole, and you have spent a weekend turning one failed part into three. Give us a call at (850) 427-6454. Give you the number first, then pick up the tool.
FAQs
In Orlando’s heat and humidity, a well-installed CertainTeed cabinet run lasts 15 to 20 years before doors, drawer boxes, or finish start to fail in a way that matters. The weak points are thermofoil doors in high-moisture zones and toekicks that catch wet mop water. Call (850) 427-6454 if your cabinets are failing early; we can tell you what is worth repairing versus replacing.
It depends on what failed. A stripped hinge screw can be repaired with a threaded insert in about 20 minutes. A delaminated thermofoil door cannot be fixed; the PVC skin has lost its adhesive bond, and regluing does not hold in Orlando’s humidity. Swollen MDF cannot be sanded back to flat. Call (850) 427-6454 and describe the part; we will tell you honestly whether repair is worth the cost.
Most single-part swaps, one door, one drawer box, one surround panel, take under half a day once the part is in hand. Full-row cabinet replacements with countertop pulls run 3 to 5 working days. Special-order CertainTeed parts usually arrive in 7 to 10 business days. We will give you a defined arrival window and a written price before we order anything.
We stock common replacement hardware on the truck: soft-close hinges, hinge plate repair brackets, drawer glides in the standard lengths, and finish-matching touch-up kits. Door and drawer fronts are ordered per job because the size, series, and finish have to match your existing cabinet exactly. We also work with compatible lines from KraftMaid, and countertop brands like Cambria and Silestone when a full kitchen remodel is the better financial call. Call (850) 427-6454 for a free estimate.
Penhallow Remodeling Orlando is an independent remodeling contractor serving Orlando and nearby areas. We are not affiliated with CertainTeed; we install and service CertainTeed and other brand cabinetry, and we stand behind the work with our own written guarantee.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
