Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Orlando Owner’s Guide
Wellborn fence installation in Orlando typically runs $3,500 to $9,000 for a complete residential project, depending on linear footage, fence height, gate count, and the terrain your posts have to sit in. Most Wellborn-compatible fence jobs take two to four working days once materials are on site, though Orlando’s sandy soil and afternoon downpours can push an install a day in either direction. The part our clients most often call about isn’t the fence itself at all: it’s a failed post footing, a gate that’s dragging, or a section that started leaning after the last heavy rain. They usually call because the gate stopped latching, or because a neighbor pointed out the back corner is leaning hard enough to notice from the street.
Before we go further: Penhallow Remodeling Orlando is an independent contractor. We are not affiliated with Wellborn, but we install and repair Wellborn fence systems regularly, and we source genuine Wellborn components plus proven aftermarket equivalents. If you have a Wellborn fence already on your property and something’s failing, this page will tell you what you’re up against and what it should cost to fix in Orlando.
Which Wellborn Models This Applies To
Wellborn’s residential fencing in Florida shows up most often in vinyl and aluminum systems, typically 4-foot to 8-foot panel heights, with routed or bracketed post assemblies. The compatibility question matters more than most homeowners expect. Wellborn has shifted post design over the years: older Orlando installs from the 2000s commonly used 4-inch square posts with internal stiffeners, while current production leans toward 5-inch posts with heavier wall thickness. A gate hinge that fits one won’t cleanly fit the other without reaming or an adapter plate.
If you’re trying to match a part, pull the panel and look for a routed or stamped production code on the backside of the bottom rail or inside the post cap. That code tells us the series and approximate production year. If the code’s faded, measure the post width and the panel’s rail thickness. Both numbers together narrow the match faster than a model name alone. For most Orlando homeowners, OEM Wellborn parts make sense on recent installs under a decade old; on older systems, a quality aftermarket rail or gate kit often saves real money and lasts as long as the original.
Styles & brands we work with
Signs Your Wellborn Fence Installation Is Failing
- Gate dragging or not latching. Most often the hinge-side post has shifted in sandy soil, or the gate’s diagonal brace has loosened. A dragging gate puts stress on every connection point and will eventually warp the panel itself.
- Leaning section after rain. Orlando’s soil drains fast, but a saturated post hole that wasn’t tamped properly will loosen. You’ll usually see it first at the lowest corner of the yard, right where water pools.
- Posts that wobble when pushed. That means the footing has failed or was never set deep enough in the first place. On a vinyl or aluminum fence, a loose post transfers wind load to the panels, and the rails bow.
- Bottom rail sagging or cracked. Florida sun and heat cycles make some older Wellborn rails brittle. Once a rail cracks, gravity and fence tension do the rest.
- White chalky residue on vinyl. This is sun damage and surface oxidation, common on Orlando installs past 10 to 12 years. It doesn’t always mean replacement, but it’s a sign the material is nearing the end of its cosmetic life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, a full Wellborn fence replacement typically runs $3,500 to $9,000 installed. A shorter 80 to 100 linear foot yard with one gate lands near the bottom of that range. A 200-plus foot perimeter with two gates, a corner post or two on sloping ground, and old footing removal can push toward the top. The biggest cost drivers are linear footage, fence height, gate count, and whether the old posts have concrete footings that need to be broken out and hauled away. Post removal always costs more than homeowners expect, because those concrete cylinders don’t come out of Central Florida soil without a fight.
Every quote we write includes labor, parts, gate hardware, removal and haul-off of the old section, and disposal. You get a written price before we start, and a written guarantee on the work when we finish. If anything fails inside the guarantee period, we come back, no service call and no re-inspection fee.
DIY or Call Us?
You can check a few things yourself: whether the posts are plumb, whether the gate alignment changed, whether the rails pulled loose from their brackets. But fence installation in Orlando is trickier than it looks, and the failure points are almost always buried below ground. Post footings need to sit deep enough to get past the sandy topsoil into stable ground, and corners need concrete sized for the wind load your fence will catch during a summer storm. Get them wrong and the whole section leans again within a season.
If the issue is a single loose rail or a gate hinge that’s come unthreaded, we can often fix that in an afternoon. If multiple posts have moved, the right fix is pulling and resetting the section, and that’s work where being wrong costs more than being honest up front. Call (850) 427-6454 and we’ll tell you what we’d do and what it’ll cost before anyone picks up a tool. As Trevor Nash puts it: give you the number first, then pick up the tool.
FAQs
Expect 15 to 20 years from a well-installed Wellborn vinyl or aluminum fence in Orlando’s climate, with the caveat that sun exposure and storm-driven wind shorten the cosmetic life faster than the structural life. Posts set correctly in concrete typically outlast the panels, and it’s not unusual for us to replace panels and rails on a job where the original posts are still solid.
Yes, if the posts are still structurally sound and the lean is caused by loose soil or a failed footing, we can reset the affected posts and re-secure the panels without replacing the whole run. If the rails have bowed or cracked from the stress, those sections get swapped, which falls somewhere under a full replacement in cost. Call (850) 427-6454 and we’ll assess what can be saved.
Most Orlando replacements run two to four working days from the first post hole to the final gate adjustment, with weather and footing removal as the two variables that move the timeline. The number we give you in the written quote includes a defined arrival window, so you know when we’re coming and when we expect to finish.
Our trucks carry common Wellborn-compatible gate hardware, post caps, rail brackets, and fasteners, so we can handle most repair calls same day. For panel and post replacements, we order the matched components and schedule the install as soon as they land, which in Orlando is usually under a week.
If your Wellborn fence is failing, don’t wait for the next storm to finish the job. Call (850) 427-6454 for a free estimate, and we’ll give you a written price before any work starts. That’s how we work, and it’s been working for Orlando homeowners for years.
Written by Trevor Nash, Owner, Penhallow Remodeling Orlando at Penhallow Remodeling Orlando, serving Orlando and nearby areas.
