Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Orlando, FL | Penhallow Remodeling Orlando
We provide independent Jerith service across Orlando, from fence repair in College Park to full aluminum fence installations near Lake Nona. What makes our Jerith work different here is simple: we know how Orlando’s high water table, afternoon thunderstorms, and wind codes stress these systems, and we fix them to last. If your Jerith fence is leaning, pitted, or sagging, call (850) 427-6454 for a real diagnosis and a written price.
Why Orlando Residents Choose Us for Jerith Service
Trevor Nash has been swinging a hammer since his days at Los Angeles Trade-Technical College, and he’s been in enough Orlando backyards to know what a 1990s Jerith install looks like after twenty years of sprinkler overspray and hurricane season. Our crews work on Jerith aluminum fence and railing systems every week across Orlando’s tract-home neighborhoods, alongside our Bathroom Remodeling - Orlando projects. We’re an independent Jerith service provider, not a manufacturer-authorized dealer, which means we make repair decisions based on what’s actually best for your fence, not what a warranty department prefers. We stock Jerith-compatible pickets, rails, post caps, and gate hardware locally, so a repair doesn’t stall waiting on a parts shipment. Give you the number first, then pick up the tool.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Orlando
- Powder-coat blistering and white rust at post bases. Orlando’s sprinkler overspray and high humidity keep the bottom six inches of a fence post damp for months. The powder coat eventually blisters, and that chalky white oxide starts creeping up. We cut out the affected section, treat the aluminum, and re-coat with a matched finish.
- Loose or stripped screws where posts meet rails. Self-tapping fasteners back out of thin-walled posts after years of wind vibration and gate slamming. You’ll see the rail wiggle before you see the screw. We drill out the stripped hole and install rivet nuts or through-bolts with nylon washers so it holds under load.
- Misaligned gate frames from sandy, expansive soil. Central Florida’s sandy soil shifts with every wet-dry cycle. Gate posts lean, the latch stops lining up, and the gate starts dragging. We reset posts in concrete with galvanized anchors, often sizing up the footing because the original was too shallow.
- Rusting galvanized stiffener inserts inside rails. Weep holes clog with oak leaves and lawn debris. Water sits inside the rail channel and the internal steel stiffener rusts through, staining the powder coat from the inside out. We replace the insert and clear the weep holes, sometimes drilling additional drainage if the original spacing was too wide.
- Storm-wind racking of long fence runs. Orlando gets sustained tropical-storm winds. Runs longer than forty feet without adequate mid-post bracing start to rack, and once a post pulls out of its bracket, the whole section leans. We reinforce with additional posts and bracket systems rated for the current wind zone.
Jerith Service in Orlando: What Local Conditions Mean for Your Equipment
In Orlando’s College Park and Delaney Park historic districts, many Jerith fences and railings were installed before modern wind-load requirements were written. When we pull permits for additions or re-roofs on those 1920s – 1950s wood-frame homes, the city often flags the existing Jerith fence as non-compliant for windborne-debris protection. That means a fence that’s been standing for twenty-five years gets pulled into a code review because the house is getting a new roof. We reinforce or replace posts and gate framing to meet current code without touching the home’s original exterior. This doesn’t happen in Kissimmee or St. Cloud the same way, because their housing stock is newer and less likely to trigger historic district review. Our tech recently repaired a Jerith Estate Series fence around a pool deck off Delaney Avenue where a sagging double gate had pulled the hinge posts out of plumb after a season of afternoon thunderstorms. We dug out the concrete footings, reset the posts with galvanized anchors, replaced the original gate hinges with a heavier aftermarket pair, and re-squared the frame. The homeowner later told us the gate now swings with one finger and survived the next hurricane watch without shifting.
Jerith Models & Products We Service in Orlando
We work on the Jerith Estate Series aluminum fence, the Regency Series, the Deluxe Series aluminum railing, and the Picket Rail line. For parts, we prefer OEM or dimensionally identical aftermarket extruded aluminum because mixing profiles from different manufacturers creates visible seams and weak joints. That matters most when you’re matching an existing run. We keep common Estate and Regency sections in stock for faster Orlando turnaround, along with matching post caps, gate hinges, and latch assemblies. For older Jerith systems no longer in production, we source exact-profile extrusion or fabricate a transition piece so the repair doesn’t look like a patch job.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Orlando
Jerith work in Orlando varies by scope, but here are the ranges we quote most often:
| Service | Orlando Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Repair | $400 – $1,800 |
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
What drives an aluminum fence job up or down is linear footage, post spacing, gate count, and whether we’re tearing out an old wood or chain-link fence first. A free estimate from us means we walk the property, measure, and hand you a written price that won’t change when the crew shows up. Call (850) 427-6454.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Orlando
Yes, in most cases. Jerith’s powder coat colors like black, bronze, and white have been consistent across production years, and we can match the finish closely enough that a new gate or panel blends in. For older fences that have faded, we’ll order a custom match or fade the new section slightly to blend. Call (850) 427-6454 and we’ll bring finish samples to compare against your existing fence before ordering parts.
Usually yes. If the posts were set in concrete and the concrete itself hasn’t cracked, we can carefully pull the post back to plumb and re-pack the surrounding soil, or reset the post in a new footing if the base has shifted. If the post itself is bent or corroded at the soil line, we replace that post and splice into the existing rails. Replacing the whole fence is rarely necessary unless multiple posts have failed.
Most current Jerith fences do meet the wind-load requirements when installed with the correct post spacing and footing depth. Older installations, especially those put in before the current code cycle, may need additional bracing or deeper footings. We pull the current Orlando wind zone data for your specific address and install or reinforce to match.
Those stains usually aren’t the aluminum rusting. They’re from the galvanized steel screw or the internal steel stiffener oxidizing and bleeding onto the powder coat. In Orlando’s humidity, this happens faster than it would inland. We replace the hardware with coated stainless or aluminum fasteners, and if the stiffener is the source, we swap it out and reseal the rail.
Yes. The usual cause is soft ground under the gate post or a hinge post that’s pulled out of plumb. We reset the post in a proper concrete footing below the wet-clay line and re-square the gate frame. For a free estimate on gate repair, call (850) 427-6454.
Service Areas Near Orlando
We run Jerith service across the Orlando metro and nearby communities. If you’re in Orlando service area neighborhoods like College Park or Delaney Park, we’re close by. We also cover Jerith service in Kissimmee, Jerith service in St. Cloud, plus Sanford, Deltona, and Heathrow. If you’re within a thirty-minute drive of downtown, chances are we can get to you.
Book Your Jerith Service in Orlando Today
If your Jerith fence is leaning, pitted, or just not latching right, call (850) 427-6454. We’ll schedule a walkthrough, give you a written price, and do the work the way we’d want it done at our own houses. For more on the systems we service, see our Jerith sales & service page.
Written by Trevor Nash, Owner at our General Contractor in Orlando, serving Orlando since 2004.
