







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in St. Cloud, FL | Penhallow Remodeling Orlando
We handle KraftMaid cabinet work across St. Cloud as an independent service provider, not a factory-authorized shop. That distinction matters because it means we source the best fix for the problem in front of us, whether that’s a genuine KraftMaid hinge or a better aftermarket steel plate that survives Florida humidity. What makes our work here different is simple: we know which KraftMaid failure modes show up in St. Cloud’s 1990s and 2000s subdivisions, and we price the repair before we pick up a tool. If you need KraftMaid cabinet installation, refacing, or a targeted repair in St. Cloud, call (850) 427-6454 for a free estimate.

Why St. Cloud Residents Choose Us for KraftMaid Service

KraftMaid cabinets are built in Ohio, and they’re good cabinets. But they were never built for what St. Cloud throws at them. The humidity off East Lake Tohopekaliga, the wind-driven rain that hammers Grassy Point and Anthem Park, and the hot attic air that cooks 1990s stucco homes all take a toll. We’ve worked on enough KraftMaid kitchens across St. Cloud to know exactly where those cabinets fail first and what’s worth fixing versus replacing.
Trevor Nash leads our crew. He learned construction at Los Angeles Trade-Technical College and spent nearly two decades on everything from slab foundations to finish carpentry before settling into Florida remodeling work. His rule is the one we follow on every KraftMaid job in St. Cloud: give you the number first, then pick up the tool. We hand you a written price before any cabinet gets pulled, and every job carries our 365-Day Done Right Promise in writing. If a repair fails inside a year, we come back and make it right at no charge.
Styles & brands we work with







Common KraftMaid Construction Problems We Solve in St. Cloud
- Thermofoil delamination on Passport Series doors. This is the one we see most in St. Cloud, especially in kitchens where the dishwasher vents toward the sink cabinet. The combination of heated moisture and older thermofoil adhesive causes the door surface to peel away from the MDF core. It’s not always a full reface; sometimes we re-bond and refinish. Other times the door is too far gone and we price a replacement door set.
- Hinge plate screw holes stripping out on particleboard stiles. KraftMaid has used particleboard stiles on several lines for years, and they hold up fine in dry climates. In St. Cloud’s hot-and-humid cycling, especially in 1990s homes where attic ventilation was never adequate, the material swells and contracts until the screws lose their bite. We fix this with threaded steel inserts or aftermarket steel hinge plates that don’t work loose again.
- Drawer glide screws loosening on Vantage full-extension runners. Lakefront homes near East Lake Tohopekaliga see chronic high indoor humidity, and that moisture settles into drawer box joinery. The full-extension glides on Vantage drawers eventually rattle loose. Sometimes the fix is as simple as re-torquing screws and adding adhesive. When the drawer box itself has swollen past tolerance, we’re straight about whether the box needs replacement.
- Edge-banding peeling on DuraKraft shelves. Poorly vented range hoods are common in 2000s St. Cloud subdivisions. Steam rises, saturates shelf edges, and the PVC edge band lifts. We reapply edge banding with a moisture-resistant adhesive and often recommend upgrading the hood vent while we’re in there.
- Rotted sink base cabinets from wind-driven rain. This one ties directly to a St. Cloud-specific construction habit we’ll explain below, and it’s the most expensive KraftMaid failure we see locally. You want this caught early.
KraftMaid Service in St. Cloud: What Local Conditions Mean for Your Equipment

St. Cloud’s Grassy Point and Anthem Park subdivisions grew fast in the 1990s and 2000s, and many of those homes were built with recessed exterior electrical panels that sit proud of the stucco. When wind-driven rain hits those panels, water tracks into the wall cavity. That same wall cavity often backs up to the kitchen sink base. We’ve pulled enough KraftMaid sink cabinets in Anthem Park to know the pattern: the particleboard bottom swells, the left hinge plate strips from the frame, and the homeowner assumes the cabinet failed on its own. It didn’t. The water got in from outside first.
Our tech pulled a Vantage sink base in Anthem Park where this exact sequence had played out. The recessed outdoor panel had been letting rain track into the shared wall cavity for years. Inside, the KraftMaid particleboard bottom was swollen and the left hinge plate had stripped. We replaced the sink base with a new Vantage cabinet, added a drip tray under the plumbing, swapped the hinge plates for aftermarket steel plates, and sealed the exterior penetration that caused it all. That’s the difference between a patch and a fix. See our full KraftMaid sales & service approach for more on how we handle these failures.
KraftMaid Models & Products We Service in St. Cloud
We work on all the KraftMaid lines common in St. Cloud kitchens: Vantage, Passport Series, DuraKraft Plus, and Painted Classic. For hinges, glides, and touch-up kits, we use genuine KraftMaid replacements when the dimensions and color codes require an exact match. For mortise plates, adjustable feet, and soft-close adapters, we fit quality aftermarket parts that hold up better in our humidity than the originals sometimes do. We keep a stock of common hardware in the truck so a St. Cloud repair doesn’t stall waiting on a shipped part. If you live elsewhere in the region, check our St. Cloud service area page to see where our crews travel.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in St. Cloud
| Service | Typical Range |
|---|---|
| KraftMaid Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel with KraftMaid Cabinets | $14,000 – $45,000 |
| KraftMaid Cabinet Refacing | $4,000 – $12,000 |
What drives the number is how much of the cabinet box is still sound. A targeted hinge plate repair is a couple hundred dollars. A full sink base replacement with exterior sealing runs more like a mid-four-figure job. A complete kitchen remodel with new KraftMaid boxes, countertops, and island varies widely depending on layout size and countertop material - learn more about our Bathroom Remodeling in St. Cloud. Every estimate we give in St. Cloud is a written line-item price before work starts. No ranges, no ballpark guesses, no change orders at the door. Call (850) 427-6454 to schedule your free estimate, and we’ll tell you exactly what the job costs.

Serving St. Cloud, FL - Our Local Coverage Area
We’re based in the St. Cloud area and know this community well as your local General Contractor - St. Cloud. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in St. Cloud
We start by finding the water path. In Anthem Park and Grassy Point homes with recessed exterior electrical panels, the failure usually starts outside, not under the sink. We inspect the exterior penetration, trace any moisture into the wall cavity, and then price the repair in two parts: sealing the exterior so water stops entering, and replacing or repairing the damaged KraftMaid sink base cabinet. Every repair carries our 365-Day Done Right Promise in writing. Call (850) 427-6454 for a site visit and written quote.
We’re independent. Penhallow Remodeling Orlando is not manufacturer-affiliated or authorized by KraftMaid, and that’s a benefit on the repair side. We choose the best part for the problem, whether that’s a genuine KraftMaid hinge or a stronger aftermarket steel plate. For new cabinet sales, we install KraftMaid boxes and order the line you want without any factory-service overhead baked into the price.
Sometimes, and sometimes we use better. For hinges, drawer glides, and touch-up kits where a color code or dimension must match exactly, we order genuine KraftMaid replacements. For components like hinge plates and soft-close adapters that get hammered by St. Cloud humidity, we often fit aftermarket parts built for that environment. We’ll tell you which is which and why before we order anything.
We service all the KraftMaid lines commonly installed in St. Cloud kitchens: Vantage, Passport Series, DuraKraft Plus, and Painted Classic. If your cabinets are from a discontinued line or a big-box variant, we can still match doors and hardware in most cases. Bring us a door or a photo and we’ll identify it from the truck.
A hinge plate or drawer glide repair is usually done in a couple hours. A sink base replacement with exterior sealing takes a full day. A complete KraftMaid kitchen install runs several weeks depending on layout and countertop fabrication. We give you a written timeline with the written price, and we call before we arrive. To get a specific timeline for your kitchen, call (850) 427-6454 for a free estimate.
Service Areas Near St. Cloud
Our crews cover St. Cloud and the surrounding communities. We regularly handle KraftMaid work in KraftMaid service in Orlando and KraftMaid service in Kissimmee, and we travel into Sanford, Deltona, and Heathrow for larger remodel projects.
Book Your KraftMaid Service in St. Cloud Today
If your KraftMaid cabinets are showing wear, don’t wait until a small hinge problem becomes a rotted sink base. Call Penhallow Remodeling Orlando at (850) 427-6454 for a free, written estimate. We’ll inspect the cabinets, explain what’s failing, and give you the number before we pick up a tool.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving St. Cloud and greater Orlando.












