Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Tremron Construction
Tremron in Orlando is everywhere, and for good reason. The concrete paver units hold up to Florida sun, afternoon thunderstorms, and the sandy soil better than most poured surfaces. We provide independent Tremron paver installation, repair, and resurfacing throughout Orlando, from College Park to Avalon Park. We’re not affiliated with Tremron and we don’t pretend to be. What we offer is hands-on, weekly experience with their Mega Olde Town, Mega Arbel, Holland Stone, and Tuscany lines, plus the local knowledge to fix what Central Florida’s climate does to them. Call (850) 427-6454 for a free estimate.
If you’re searching this page, you likely own Tremron pavers or you’re choosing them for a driveway or patio. Either way, you want a General Contractor who understands how these specific units perform on Orlando’s sandy subgrade, under hurricane-season rain, and through ten months of humidity. That’s us.
Why Trust Penhallow Remodeling Orlando for Your Tremron Construction?
Trevor Nash, our owner, learned construction the hard way: two decades swinging a hammer, from slab foundations to finish carpentry, with formal training at Los Angeles Trade-Technical College behind it. He’s the kind of contractor who says “substrate” and then tells you it’s the compacted base layer under your pavers, because you shouldn’t have to Google anything mid-conversation. Give you the number first, then pick up the tool. That’s how he runs our Orlando crews.
Our technicians work on Tremron pavers every week. They know the difference between a Mega Olde Town paver’s tumbled edges and the cleaner lines of a Holland Stone unit, and they know which one responds better to re-leveling versus selective replacement. We use OEM-compatible products where it matters, pull from Tremron’s local Orlando production inventories for color-matching, and never sell you a full redo when re-compacting the base will do the job. Every job gets a written price before work starts and a written 365-Day Done Right Promise. If the repair fails inside a year, we come back free. That’s not marketing copy; it’s in the contract.
Styles & brands we work with
Common Tremron Construction Problems We Fix in Orlando
Here’s what we actually see on Tremron installations across Orlando, week after week.
- Base washout and paver settlement in Mega Olde Town and Mega Arbel units. Orlando’s summer thunderstorms deliver an inch of rain in twenty minutes. Water finds its way into the sand bed under the pavers, carries it out through unsealed edges, and leaves the larger Mega units sitting uneven. You’ll notice lippage, meaning one paver edge sits higher than its neighbor. The fix is re-compacting the base, not ripping out the pavers.
- Sand joint erosion and weed growth in Holland Stone patterns. Holland Stone pavers have straight, tight edges, which looks clean until the joint sand washes out. Then the pavers shift, wobble, and weeds get a foothold. We see this constantly on older Orlando driveways where the original sand was never sealed. The long-term answer is re-sanding with a quality polymeric product, not just sweeping sand back in.
- Efflorescence and surface scaling on colored Tuscany and Olde Town pavers. Central Florida’s humidity cycles pull moisture through the concrete, leaving white mineral deposits on the surface. Irrigation overspray makes it worse. Efflorescence is usually cosmetic, but if left for years it can progress to scaling, where the paver face actually flakes. We tell homeowners which is which before recommending anything.
- Edge restraint separation where pavers meet concrete aprons or driveways. On many Orlando driveways, Tremron’s beveled-edge units run up against a poured concrete apron or sidewalk. The edge restraint fails, and pavers start migrating outward. The whole driveway never fails at once, but the edges slowly spread. We reset the restraint and re-anchor the border rows.
- Tree root lift and sunken walkway sections. In older Orlando neighborhoods like College Park and Delaney Park, mature oak roots push pavers up unevenly. Combined with base washout, you get sunken walkways. We addressed exactly this last month on a 500-square-foot Tremron Tuscany patio in Winter Park. Neighbor tree roots had pushed up two dozen pavers and the washed-out base had dropped the walkway. We excavated the root sections, laid geotextile fabric, re-graded with compacted lime rock, and re-laid the original pavers with new polymeric sand. The homeowner kept their patio and got a level surface that drains properly.
Tremron Parts & Our Repair-vs-Replace Approach
When you need selective paver replacement, matching matters. Tremron’s color blends shift batch to batch, and a paver that sat in an Orlando yard for twelve years has faded differently than a fresh production run. We pull from Tremron’s local Orlando production inventory to find the closest match by size, color, and texture. For joint stabilization and sealing, we use polymeric sands and sealers from brands like Techniseal, which outperform basic bagged sand in Florida’s rain cycles.
We never default to full replacement. A sunken driveway section usually means the base failed, not the pavers. If the units are intact, re-compacting the base and re-laying the same pavers costs a fraction of a new install. We’ll tell you when replacement is genuinely cheaper long-term, and we’ll show you the numbers both ways. Call (850) 427-6454 if you’re not sure what your Tremron surface needs.
Our Tremron Service Process – Step by Step
- 1
Diagnosis. We inspect the entire Tremron surface, not just the visible problem area. We check edge restraints, joint sand condition, base compaction, and drainage flow. On Orlando slabs with no slope, we look for where water pools after a storm.
- 2
Written scope and price. You get a line-item breakdown before any work starts. It names the paver line (Mega Olde Town, Holland Stone, Tuscany, etc.), the specific repair or install approach, and the materials. The number on that sheet is the number on the invoice.
- 3
Repair or installation. We remove only what’s necessary, re-compact the base with lime rock where needed, reset edge restraints, and re-lay the Tremron units. For color-matching, we verify against the existing surface in daylight, not indoor lighting.
- 4
Joint sand and compaction. We sweep in polymeric sand, mist it to activate, and run plate compaction across the surface. This locks the pavers and keeps weeds and washout down in Orlando’s rain season.
- 5
Test and warranty. We walk the surface with you, check for movement and drainage, and hand you the written 365-Day Done Right Promise. If anything shifts inside a year, you call us and we come back at no charge.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in Orlando
We work on the full range of Tremron pavers common in Orlando driveways, patios, pool decks, and walkways. That includes Mega Olde Town pavers with their tumbled, old-world look; Mega Arbel units with their longer rectangular profile that handles traffic well; Holland Stone pavers for straight-joint, clean-lined patterns; and Tuscany pavers for a more textured, natural-stone appearance. We keep common base materials, edge restraints, and polymeric sands on hand for quick turnaround. For paver colors and sized units from Tremron in Kissimmee and Orlando-area production runs, we can usually get them the same week.
We Also Service These Brands
Tremron is a big part of our hardscape work, but it’s not the only brand we handle. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on our interior remodeling projects. You don’t need to hire separate specialists for the driveway and the kitchen. We’ll give you the same written price and the same guarantee across all of it.
FAQs – Tremron Construction Service in Orlando
Why are my Tremron pavers turning white or chalky in Orlando’s humidity? That white film is efflorescence, mineral salts pulled to the paver surface by moisture migration. Orlando’s humidity and irrigation overspray accelerate it. Efflorescence usually fades or can be cleaned with a paver-specific cleaner, but if the surface has started flaking, that’s scaling and it may need a sealer or localized replacement. We’ll tell you which one you’re dealing with. Call (850) 427-6454 for an inspection.
Can you match Tremron pavers that are 10+ years old for a patio extension? Yes, with expectations set honestly. Tremron’s color blends shift over the years, and your existing pavers have been bleaching under the Orlando sun for a decade. We pull from Tremron’s local production inventory and sample against your existing surface in daylight. A perfect match isn’t always possible, but a well-blended transition that doesn’t draw the eye usually is. We’ll show you samples before committing.
My Tremron paver driveway has sunken areas after heavy rain. Do I need a full replacement? Almost never. Sunken areas mean the base under the pavers washed out or compacted unevenly, not that the pavers failed. We lift the affected sections, re-compact the base with lime rock, address any drainage issue, and re-lay the original Tremron units. Most Orlando driveway settlement repairs run $1,500 to $5,000 depending on square footage, versus $7,000 to $18,000 for a full paver driveway replacement. Call (850) 427-6454 and we’ll tell you which one your driveway actually needs.
What causes weeds to grow between Tremron pavers and how can I stop them? Weeds grow in the joint sand when it has organic material in it and enough moisture. Orlando’s rain does the watering. The permanent fix is to remove the old sand, clean the joints, and re-sand with a polymeric sand that hardens when activated. It resists washout, blocks most weed germination, and lasts years longer than plain sand. We use Techniseal products specifically because they hold up in Florida’s rain season.
Are Tremron pavers suitable for a sloped Orlando driveway? Yes, with proper base preparation and drainage planning. Tremron’s Mega Arbel and Holland Stone units interlock well on moderate slopes. The issue on sloped Orlando driveways is usually water velocity during heavy downpours; it cuts through joints and erodes the base faster. We design edge restraints and drainage channels to manage that runoff. A sloped paver driveway costs the same $7,000 to $18,000 range as flat, but the prep work matters more.
Is Penhallow Remodeling Orlando authorized by Tremron? No. We’re an independent Tremron service provider. We’re not a factory-authorized installer and we don’t present ourselves that way. What we are is a remodeling company with deep hands-on Tremron Construction in St. Cloud, FL and Orlando experience, pulling from local production inventory and standing behind our work with a written 365-Day Done Right Promise. That guarantee is ours, not Tremron’s, and it’s in writing on every job.
Book Your Tremron Service in Orlando, FL
If your Tremron pavers are sinking, shifting, or just showing their age after too many Orlando summers, call us at (850) 427-6454. We’ll schedule a free estimate, hand you a written price before any work starts, and put the 365-Day Done Right Promise in writing.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving Orlando homeowners with written pricing and guaranteed workmanship.
