Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Mr-Glass Construction
We provide independent Mr Glass in Orlando construction service, specializing in frameless glass shower enclosures, walk-in shower installation, and tub-to-shower conversions. Our crews work with Mr-Glass Neo-Angle, Frameless Sliding, and Pivot Hinge series shower doors on bathroom remodels across Orlando every month, which means we know exactly how these units perform under Central Florida’s hard water and humidity. We are not an authorized Mr-Glass dealer or service center, but that independence lets us give you an honest read on what to fix and what to replace. Call (850) 427-6454 to schedule service.
Why Trust Penhallow Remodeling Orlando for Your Mr-Glass Construction?
Trevor Nash, General Contractor and owner of Penhallow Remodeling Orlando, learned construction fundamentals at Los Angeles Trade-Technical College and spent nearly two decades on job sites before building this company on a single idea: give the customer a written number and a written guarantee before anyone picks up a tool. That principle is the reason we’re the crew Orlando homeowners call when a Mr-Glass enclosure fails and they want a straight answer, not a sales pitch.
Our technicians have installed and repaired enough Mr-Glass units to recognize failure patterns before they happen. We know how Mr-Glass roller assemblies behave after years of daily sliding, how their pivot hinges react to humid bathrooms with weak exhaust fans, and what hard-water does to their clear glass panels within a season or two. That hands-on familiarity means we diagnose faster and quote accurately. Every Mr-Glass repair or installation we do carries our written 365-Day Done Right Promise. If the work fails inside the guarantee period, we come back and make it right at no charge. You also get a written price before any work starts, so the number on day one is the number on the invoice. That is the Kingswell Way, and it has governed how we operate since 2004.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Orlando
Here are the five issues we see most often with Mr-Glass shower enclosures in Orlando bathrooms:
- Hard-water etching on clear glass panels. Orlando municipal water is hard, and untreated water leaves mineral deposits that cloud Mr-Glass clear glass within 12 to 18 months. Once the silica in the glass reacts with calcium and magnesium, the haze is not a surface film you can wipe off. It is etched into the glass. We often recommend a water softener or a glass treatment after replacing etched panels.
- Roller and track misalignment on Mr-Glass Frameless Sliding Shower Door Series. Daily use loosens the roller adjustment screws, and the door drops a few millimeters. You feel it bind, then it jumps the track. We realign the rollers and re-level the door, and if the rollers are worn flat, we replace them with factory-spec parts so the door glides the way it did when new.
- Deteriorated vinyl sweeps and seals. Mr-Glass frameless enclosures use vinyl sweeps along the bottom edge and seals where glass meets glass or wall. In a humid Orlando bathroom, those sweeps turn brittle and crack. That is when water starts leaking onto the bathroom floor at the corners. Replacing a sweep is a quick fix, but ignoring it can damage baseboards and subfloor.
- Stripped or corroded hinge screws on Mr-Glass Pivot Hinge Shower Door Series. Orlando humidity, especially in bathrooms without a working exhaust fan, corrodes the zinc-plated screws Mr-Glass uses on their pivot hinges. The screw head strips when someone tries to tighten a sagging door. We extract the old screw, re-tap the hole if needed, and install stainless hardware so the hinge holds.
- Shattered tempered glass. A small chip near the edge of a Mr-Glass panel can spread into the classic spiderweb pattern when temperature swings stress the glass. Orlando’s hot afternoon sun through a bathroom window does this more often than people expect. When glass shatters, we replace the entire enclosure, because tempered glass cannot be repaired and a patch on a wet area is a leak waiting to happen.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We default to genuine Mr-Glass parts for hinges, rollers, and structural hardware. The tolerances on those components are tight, and an off-brand roller with the wrong wheel profile will chew up the track. For consumables like vinyl sweeps and gaskets, we often use high-quality aftermarket equivalents that match factory specs at a lower cost. The goal is a repair that lasts without overcharging you for a strip of vinyl with a logo on it.
Some failures are not worth patching. If a Mr-Glass enclosure has frame corrosion or shattered tempered glass, we quote full replacement rather than a half-measure. Safety and watertightness cannot be reliably restored on a corroded frame, and no sealant will make shattered glass safe again. We stock common Mr-Glass roller kits, hinge assemblies, and sweep profiles locally in Orlando, which keeps turnaround fast for most repairs. Call (850) 427-6454 and we’ll tell you straight whether your enclosure is worth repairing.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. A background-checked, uniformed technician arrives at your Orlando home during a real arrival window you got in advance. We inspect the Mr-Glass unit, identify the failure, and show you the worn part or stress point before quoting anything.
- 2
Written quote. You get a written number for the repair or replacement before any work starts. That number is what you pay. No verbal ballpark that shifts when we show up with tools.
- 3
Repair or installation. We use genuine Mr-Glass parts for structural hardware, our preferred aftermarket equivalents for consumables, and factory-spec sealants rated for wet service. For full replacements, we square the frame, shim the curb if needed, and set the glass so the gaps are even and the seals make full contact.
- 4
Test. We run the door through its full travel, check for binding, and run water down the glass to confirm the sweeps and seals do their job. If the floor stays dry, the job is done. If not, we fix it before we leave.
- 5
Warranty. Every Mr-Glass service we perform is covered by our written 365-Day Done Right Promise. If something fails inside the guarantee period, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Orlando
We service and install all three major Mr-Glass product families: the Neo-Angle Shower Enclosure Series for corner showers, the Frameless Sliding Shower Door Series for wide openings, and the Pivot Hinge Shower Door Series for single-door entry showers, including Mr-Glass Construction in St. Cloud, FL. Our Orlando inventory includes common Mr-Glass roller kits, pivot hinge assemblies, sweep profiles, and seal gaskets, which keeps most repairs to a single visit. When a full replacement makes more sense, we quote the enclosure, the installation, and the haul-away in one written number. We recently replaced a Mr-Glass Neo-Angle enclosure in an Orlando home where the bottom pivot hinge had corroded and the glass was badly etched from years of hard water. Our tech removed the old unit, installed a new Mr-Glass pivot door with a factory hinge kit, and added a water softener recommendation to keep the new glass clear. The homeowner was back to a leak-free, clear glass shower in one day.
We Also Service These Brands
We’re not locked into one manufacturer. Alongside Mr-Glass, we work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on kitchen and bath remodels throughout Orlando. If you’re planning a bigger project, we can coordinate the glass, the cabinets, and the counters under one written price and one guarantee.
FAQs – Mr-Glass Construction Service in Orlando
No. We are an independent Mr-Glass service provider in Orlando. That means we are not bound by manufacturer service pricing or parts markups, and we will tell you honestly when a repair is worth doing and when replacement is the smarter spend.
For hinges, rollers, and structural hardware, yes, we use genuine Mr-Glass parts to preserve exact fit and finish. For consumables like vinyl sweeps and gaskets, we often use high-quality aftermarket equivalents that match factory specifications at a lower cost. We will always tell you which is which before we install anything.
Once the glass is etched, no cleaner will restore it. The mineral deposits have chemically bonded to the glass. We recommend replacing the panel and then protecting the new glass with a water softener or a durable glass treatment, especially if your Orlando home is on untreated municipal water. Call (850) 427-6454 and we can assess whether your panels can be buffed or need replacement.
Yes. We keep common Mr-Glass roller kits and track assemblies in our Orlando inventory, which means most sliding door repairs are done in a single visit. If your door is binding or jumping the track, call (850) 427-6454 and we’ll bring the right parts with us.
In most Orlando homes, yes. The tub drain can often be reused for a linear or center-drain shower pan, which keeps the conversion faster and less invasive. We have done these conversions in College Park bungalows, Mr Glass in Kissimmee homes, and newer subdivisions alike. The typical tub-to-shower conversion with a Mr-Glass enclosure runs $3,500 to $10,000 in Orlando, depending on pan, valve, and tile choices.
Almost always, the vinyl sweep has cracked or the corner seal has pulled away from the glass. Humidity in Orlando bathrooms accelerates that deterioration. It is a small part, but replacing it requires matching the sweep profile exactly so the door still closes cleanly. We carry the common profiles and can replace it in one visit. Call (850) 427-6454 for a written quote.
Book Your Mr-Glass Service in Orlando, FL
If your Mr-Glass shower enclosure is etched, leaking, or off-track, we can give you a written price and a written guarantee on the repair or replacement. Call (850) 427-6454 to schedule a service visit and get the number before any work starts.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving Orlando homeowners with written prices and the 365-Day Done Right Promise.
