Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Kohler Construction
Penhallow Remodeling Orlando provides independent Kohler in Orlando construction service across Orlando, FL – installing, repairing, and integrating Kohler fixtures into kitchens, bathrooms, and whole-home remodels. We work on Kohler product as remodelers, which means we handle the full construction picture: supply plumbing, waterproofing, cabinet fit, countertop integration, tile tie-in, and the framing behind the fixture. We are not a factory rep and we are not authorized by Kohler. We are an Orlando contractor who has spent years pulling apart Kohler installations to fix what Orlando’s hard water and humidity do to them, and putting them back so they hold. Call (850) 427-6454 for a free estimate on any Kohler service.
Why Trust Penhallow Remodeling Orlando for Your Kohler Construction?
Trevor Nash, owner of Penhallow Remodeling Orlando, learned construction at Los Angeles Trade-Technical College and spent two decades on slab foundations, framing, and finish carpentry before bringing that trade-first approach to Orlando. His crew has worked on Kohler fixtures in College Park bungalows with 1950s-era framing, where a new cast iron sink means checking the cabinet structure before anything else. That background shapes how we handle Kohler work: we treat every fixture as part of a larger system, not an isolated part swap.
When we install a Kohler Choreograph shower wall in Orlando, we check the framing behind it for moisture damage first – because in this city, a wall panel that looks fine can be hiding rot from years of humidity. When we set a Kohler cast iron undermount sink, we torque the clips to the manufacturer’s specification, not until they feel snug. Undersetting or oversetting those clips is how enamel spider-webs and cracks. These are the details that separate a repair that lasts from one that fails again in a season. And every Kohler job we do carries the 365-Day Done Right Promise: if the work fails inside a year, we return and fix it at no charge, in writing.
We are an independent Kohler service provider, not a Kohler-authorized shop. That means we can recommend the right fix without a manufacturer’s incentive structure behind the advice. Sometimes that’s an OEM part. Sometimes it’s telling you honestly that a 40-year-old tub is not worth the repair cost.
Styles & brands we work with
Common Kohler Construction Problems We Fix in Orlando
These are the Kohler failures we actually see in Orlando homes, not the generic list from a catalog. Central Florida hard water, high humidity, and the sheer age of the housing stock here create failure patterns that don’t show up the same way in Ohio or Arizona.
- Kohler Choreograph shower wall panels delaminating at the seams. The Choreograph system uses interlocking wall panels over a substrate. In Orlando, we have pulled apart more than a few of these and found the original installer skipped proper waterproofing behind the panels or used the wrong adhesive. Moisture gets behind the panel, the seam lets go, and you get mildew and rot building in the wall cavity. The fix is usually a full removal, framing inspection, proper waterproofing, and reinstallation. A tub-to-shower conversion with new Choreograph panels in Orlando typically runs $4,500 – $10,000.
- Cracked cast iron enamel around the drain on Kohler kitchen sinks. This one has a clear cause: impact damage or an over-torqued sink clip. We have removed Kohler Whitehaven sinks in Winter Park and found the enamel fractured from underneath because the last installer cranked the clips too hard. Cast iron is rigid. If the clip pulls the flange down unevenly, the enamel cracks within a season or two. The sink usually needs full replacement once that cracks through to iron.
- Ceramic disc cartridges in Kohler faucets scaling up from hard water. Orlando water carries heavy mineral content. Kohler kitchen faucets using ceramic disc cartridges – like the Sous line – develop scale on the disc surfaces that makes the handle stiff or causes a slow drip. Some people keep replacing cartridges and wondering why the problem comes back. The answer is usually water treatment, not another cartridge. A cartridge replacement runs $180 – $400 in Orlando.
- Pop-up drain linkage disconnecting inside Devonshire lavatory faucets. The Kohler Devonshire collection uses a mechanical pop-up assembly where the linkage arm can slip off the pivot inside the drain body. That leaves the stopper stuck either up or down. It’s a ten-minute fix if you know which rod to reset, but the first diagnosis often sends people to replace the whole faucet. We fix the linkage.
- Vintage Kohler RiverBath and Greek tubs rotting at the feet or overflow. Orlando’s humid crawlspaces and older bungalow slabs make hidden tub leaks worse. On original 1920s-1950s homes in College Park and Delaney Park, we have seen tub overflows that leaked into wall cavities for years before anyone noticed. By the time we get there, the cast iron feet are corroded or the overflow gasket has turned to crumble. Some of these are worth saving with re-chromed salvage parts. Others are not.
Kohler Parts & Our Repair-vs-Replace Approach
We default to genuine Kohler OEM parts for trim, cartridges, gaskets, and clips. This is not brand loyalty for its own sake. Kohler fixture tolerances are tight, and aftermarket seal kits often fail within a season because the rubber compound is a few thousandths off. A $12 aftermarket gasket that leaks in four months costs more than the OEM part once you factor in the second service call. So we stock OEM Kohler cartridges, gaskets, and drain assemblies locally for fast turnaround on the most common Orlando failures.
There are exceptions. For obsolete cast iron tubs or old Kohler RiverBath whirlpool components that the factory no longer makes, we fabricate repair parts from quality re-chromed salvage or have local machine shops produce a replacement. We will also tell you plainly when a full replacement costs less than repeated patch jobs. A 35-year-old RiverBath tub with rotted feet, bad jets, and a rusted overflow is not a repair candidate – you’re looking at a tub-to-shower conversion or full replacement, and we will give you the written price for both before you decide. Call (850) 427-6454 to talk through what your fixture actually needs.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We inspect the Kohler fixture in place, checking what’s behind it, under it, and around it. For a leaking shower, that means checking the waterproofing layer, not just the visible grout. For a stiff faucet, we check the cartridge and the water pressure. We give you the number first, then pick up the tool.
- 2
Repair or install. If the fix requires OEM Kohler parts, we pull from our local stock or order them. For installation work like a walk-in shower with a Kohler cast iron pan, we build the substrate correctly, set waterproofing to Florida code, and torque every mechanical connection to Kohler’s specification.
- 3
Test and verify. We run water through every connection, check for leaks at the supply and drain, cycle the faucet handles, and verify the shower pan drains correctly with no pooling. Then we clean the site – the job is not done until the workspace is cleaner than we found it.
- 4
Warranty in writing. Every Kohler service we perform includes the 365-Day Done Right Promise in writing. If the work fails inside a year, we return and fix it at no charge. No service call fee, no re-inspection fee, no debate. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Orlando
Our Kohler coverage spans the product lines most common in Orlando’s 1970s-2000s tract homes and older College Park and Delaney Park bungalows: Kohler Choreograph shower wall kits, the Devonshire and Tresham bathroom collections, cast iron undermount kitchen sinks including the Whitehaven and Riverby lines, Kohler kitchen and lavatory faucets (including the Sous and Bellera lines), vintage Kohler RiverBath and Greek tubs, and Kohler cast iron shower pans. We stock OEM cartridges, gaskets, pop-up assemblies, and sink clips locally. For full remodels, we install Kohler fixtures into kitchens and bathrooms we build ourselves as part of our General Contractor services, which means one crew handles the plumbing, waterproofing, countertop, and cabinetry – not three subs pointing fingers at each other.
We Also Service These Brands
Kohler is one part of a broader materials lineup we work with every day. We install KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, James Hardie siding, and Toto and Moen fixtures. The point is simple: the products behind our 365-Day Done Right Promise are industry-recognized brands, so the guarantee stands on something real.
FAQs – Kohler Construction Service in Orlando
Yes, Kohler Choreograph shower walls are designed to install over a clean, sound surface, including existing tile, as long as the tile is firmly bonded and the wall is structurally flat. The catch in Orlando is what is happening behind that tile. If the existing tile is hiding moisture damage from our humid climate or a leaking shower pan, covering it with Choreograph panels just seals the problem inside the wall. We always inspect the framing and waterproofing before deciding whether to go over the tile or tear it out. Call (850) 427-6454 and we’ll look at your specific shower.
Two common reasons. First, the cartridge may not be seated fully, or the retaining nut may be cross-threaded, which leaves a tiny gap that drips. Second, and more common in Orlando, mineral scale from hard water can damage the new cartridge’s seal surfaces within weeks if the valve body has scale buildup. If the valve body itself is pitted or scaled, no new cartridge will seal correctly. We see this constantly with Devonshire and Tresham tub fillers in Orlando homes. A quick valve body inspection tells us whether it’s a reseat job or a full valve replacement.
It depends on the tub’s condition, but in Orlando’s housing stock, the honest answer is usually convert. RiverBath tubs from the 1980s and 1990s almost always have failing jet seals, corroding fittings, and water that sits in the circulation plumbing growing biofilm. A tub-to-shower conversion with a walk-in shower and a Kohler cast iron pan typically runs $4,500 – $10,000 for Kohler in Kissimmee and Orlando, and you end up with a shower that’s easier to maintain and doesn’t hide water where you can’t see it. A full RiverBath restoration can easily exceed that number once you factor in jet replacement, plumbing access, and refinishing. We’ll give you a written price for both options.
Yes, but only if the cabinet is prepared correctly and the sink clips are torqued to spec, not “until it feels tight.” In a Winter Park kitchen near Kohler Construction in St. Cloud, FL, we removed a cracked Kohler Whitehaven cast iron undermount sink and found the original installer had over-torqued the clips, spider-webbing the enamel from the underside. We reinforced the cabinet top, installed the new sink with Kohler OEM clips torqued properly, and set a Kohler Sous Pro faucet with stainless trim. The finish has held two years without a chip. The silicone bead and correct torque make the difference that Orlando humidity can’t undo.
No. Interior plumbing and fixture work on a Kohler shower or sink does not touch your roof system, and your re-roof warranty remains intact. We mention this because we are often on jobs where another trade has done recent work, and homeowners worry one repair invalidates another. If there is a roof leak above the bathroom, that’s a separate roofing issue. Tell us about any recent re-roof during your estimate, and we’ll make sure our work doesn’t interfere with anything structural.
Here are the price ranges we quote for Kohler work in Orlando:
| Service | Price Range |
|---|---|
| Tub-to-Shower Conversion with Choreograph panels | $4,500 – $10,000 |
| Walk-in Shower with Kohler cast iron pan | $5,000 – $12,000 |
| Kitchen remodel including Kohler sink/faucet integration | $14,000 – $45,000 |
| Kohler faucet cartridge replacement | $180 – $400 |
These are written price ranges, not vague estimates. The number we put in writing before work starts is the number on the invoice at the end. Call (850) 427-6454 for an exact quote – estimates are free.
Book Your Kohler Service in Orlando, FL
If you own a Kohler fixture in Orlando and it’s leaking, stiff, cracked, or just past its useful life, call (850) 427-6454. We’ll schedule a free estimate, diagnose the issue, and put a written price in your hands before any work begins. A live person answers around the clock. Trevor and the crew at Penhallow Remodeling Orlando stand behind every Kohler job with the 365-Day Done Right Promise.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving Orlando homeowners with written-price remodeling and independent Kohler service since the Kingswell standard began in 2004.
