Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Orlando?
A custom window and door order in Orlando, FL typically runs between $8,000 and $25,000 for impact-rated windows and $4,500 to $15,000 for standard window replacement, with custom door orders adding $1,500 to $8,000 per opening depending on material and glass package. Most Orlando homeowners budget $12,000 to $30,000 for a whole-home custom window and door package that meets Florida’s wind-borne debris codes. These numbers reflect mid-2026 pricing across Orange County, and the final figure comes down to product line, opening count, and whether your home sits in a high-velocity hurricane zone (HVHZ) requiring heavier reinforcement.
Before we get into the itemized breakdown, it helps to understand why Orlando pricing differs from national averages. Florida building code is stricter than most states. Impact glass or shutter-rated openings are required in most of greater Orlando, and that compliance cost is baked into every quote you’ll see from a legitimate contractor. If a bid seems suspiciously low, ask whether it includes Florida Product Approval documentation. A window without that paperwork won’t pass inspection in Orange County, and the correction costs more than doing it right the first time.
At Penhallow Remodeling Orlando, we put the full price in writing before any order is placed. You’ll know the per-opening cost, the glass package, the hardware allowance, and the installation labor before we cut a single purchase order. Trevor Nash runs our Orlando operation, and he’s the one who walks you through the numbers.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what we’re seeing across the Orlando market this year. These ranges cover material and installation for a standard retrofit or full-frame replacement in a typical Central Florida home. They assume code-compliant glazing, standard interior trim, and disposal of the old units.
| Line Item | Typical Range (Orlando, FL) | Notes |
|---|---|---|
| Impact window installation (whole home, 8-12 openings) | $8,000 – $25,000 | Includes Florida Product Approval docs; price scales with size and frame material |
| Standard window replacement (non-impact, interior rooms) | $4,500 – $15,000 | Lower end for vinyl single-hung; higher end for clad wood or fiberglass |
| Custom entry door (single, impact-rated) | $2,500 – $7,500 | Fiberglass or steel slab, pre-hung, with hardware and finish |
| Custom French door or sliding glass door (impact-rated) | $4,000 – $12,000 | Multi-panel and multi-slide configurations push past $10,000 |
| Custom interior door (per opening) | $400 – $1,200 | Solid core, pre-hung, painted or stained to match existing trim |
| Transom or sidelight addition | $600 – $2,500 | Decorative glass and custom mullions add cost |
| Permit and inspection fees (Orange County) | $150 – $500 | Product approval submittal adds $50-$100 per opening in some jurisdictions |
| Trim, casing, and drywall repair around new openings | $400 – $1,800 | Full-frame replacements require interior finish work |
What Drives the Price Up
The biggest cost variables in Orlando are glass type, frame material, and whether you’re doing a retrofit or full-frame tear-out. Impact-rated laminated glass runs roughly 40-60% more than standard insulated glass, and in a hurricane zone, you don’t get to skip it on exterior openings. Aluminum frames are common in older Orlando homes and typically the most affordable option, but they conduct heat. Vinyl runs the middle of the road. Fiberglass and clad wood sit at the top and add real cost, but they hold finish and seal better in Central Florida humidity.
Custom sizing also matters. Builders in neighborhoods like Baldwin Park, College Park, and Winter Park often used non-standard rough openings. If your windows aren’t stock dimensions, expect a 15-25% upcharge for custom manufacturing. And if you want divided lites, obscure glass, or a bronze or coastal finish, that adds another $75 to $150 per window.
What Keeps the Price Down
Standard white vinyl in standard sizes, retrofitted into existing frames rather than doing a full tear-out. You give up some visible glass area with a retrofit, but it’s significantly less labor. Also, bundling all your window and door work into one contract instead of piecemealing it saves on mobilization, permitting, and install crew scheduling. We’ve seen that consolidation alone take 8-12% off a quote compared to doing windows in spring and doors in fall.
What Affects Custom Window & Door Order Pricing in Orlando
Orlando has a handful of cost drivers that don’t show up in national price guides. Here’s what actually moves the number when you’re ordering in this market.
- Florida Product Approval compliance. Every exterior window and door in Orange County must carry Florida Product Approval documentation. Glass without it won’t pass inspection. The testing and certification cost is built into the per-unit price but varies by manufacturer line. Cheaper brands spread the certification cost across fewer SKUs, so the savings aren’t always there.
- Wind speed zone rating. Most of Orlando sits in a 130-140 mph wind zone, but homes closer to the coast or in open exposure areas can fall into higher categories. Higher-rated glass and anchoring systems cost more. We check your specific exposure category before quoting so there are no surprises at permitting.
- House style and construction era. Block-construction homes from the 1960s and 70s in areas like Azalea Park and Conway have thick walls and deep window reveals, which usually means a straightforward full-frame swap. Wood-frame builds in neighborhoods like Thornton Park and Delaney Park often have rotted sills and undersized headers to repair once the old window comes out, which adds carpentry labor.
- Glass package and Low-E coatings. In Orlando, Low-E glass is essentially standard on any quality job. Upgrading to a higher solar heat gain coefficient or a triple-pane package for energy efficiency adds $50 to $120 per window. Given July afternoons here, most homeowners find that money well spent, but it’s a voluntary upgrade.
- Crane access and second-story work. Custom transoms, arched windows, or openings above a lanai sometimes need a crane or lift instead of a ladder crew. That adds $400 to $1,200 per day depending on access. Homes on Lake Conway or in Windermere with steep, terraced lots hit this more often than flat-lot ranch homes.
- Level of hardware and finish. A basic interior passage door knob is $20. A matte-black lever with a commercial-grade latch is $85. Multi-point locking entry hardware, which we strongly recommend on any exterior door in Orlando, runs $200 to $450 per door. Hardware spending adds up fast across a whole house.
How to Save on Custom Window & Door Order Without Cutting Corners
You have more control over the final invoice than you might think. Here’s what we tell Orlando homeowners who want a tight number without ending up with builder-grade junk.
1. Order everything at once. A complete window-and-door package in one purchase order gets better manufacturer pricing and one permit cycle, one delivery, one install crew. You also avoid paying two mobilization fees. In practical terms, that’s usually $1,000 to $2,500 less than splitting the project across two seasons.
2. Stay with standard rough openings when you can. If a custom size isn’t required, don’t ask for it. Custom manufacturing carries a premium at every window plant. Standard sizes from major Florida-approved manufacturers like PGT, WinDoor, and Simonton are faster to source and notably cheaper per unit.
3. Pick vinyl or aluminum for window frames; spend your money on glass. In Central Florida, the glass is what protects your house and cuts your power bill. A mid-range vinyl frame with a good impact Low-E laminate outperforms a fiberglass frame with basic glass, and it costs less. Put the budget where the sun hits it.
4. Refinish existing interior doors rather than replacing them. If your interior door slabs are solid and square, they can be prepped, painted, and re-hung with new hardware for a third of the cost of replacement. This is a common approach in older Orlando neighborhoods where solid-wood doors from the 1950s beat anything you’d buy off the shelf today.
5. Get a written quote with a line-by-line breakdown. Any contractor who hands you a single number without telling you what’s in it is guessing, and the guess usually revises upward. At Penhallow Remodeling Orlando, you get a written price before any order goes in, and the number on day one is the number on the invoice. Trevor Nash walks every Orlando homeowner through the breakdown personally. Call (850) 427-6454 and ask for a free estimate, no obligation.
Why Our Orlando Pricing Stays Honest
We operate under the Kingswell Way, which has governed how our work is quoted and delivered since 2004. That standard requires three things: a written price before any work starts, a defined arrival window, and a written guarantee on every project. It’s not marketing language. It’s the operating procedure Trevor Nash and every Penhallow technician works under.
Our pricing approach comes down to this: say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it. And if the work fails inside the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s included in writing on every window and door order we sign in Orlando.
If you’re weighing options, start with the numbers in this guide. Then call us and compare against what we write down. The differences aren’t usually about brand markup. They’re about whether the quote includes code compliance, permit fees, and the kind of glass package that actually performs in Orlando’s climate.
For a deeper look at how the full custom order process works, see our Custom Window & Door Order in Orlando page. And if you’re replacing windows as part of a larger project, head back to the home page to see how the whole scope fits together.
FAQs – Custom Window & Door Order Cost in Orlando
How much does a custom impact window cost per opening in Orlando?
A single custom impact window in Orlando typically costs $800 to $2,400 installed, depending on size, frame material, and wind zone rating. Standard-size impact windows from approved manufacturers land on the lower end, while oversized or architectural-shape units with custom mullions push toward the top of that range. The per-opening price includes the Florida Product Approval documentation required for permitting in Orange County. Call (850) 427-6454 for a per-opening quote specific to your house, free of charge.
Is it cheaper to replace all windows at once or one at a time?
Replacing all windows at once usually saves $1,000 to $2,500 compared to replacing them one at a time over several months. The savings come from a single permit cycle, one delivery, one install crew mobilization, and volume pricing from the manufacturer. Piecemeal replacement also means paying the project minimum every time, which in Orlando is typically $1,500 to $2,000 regardless of job size. If your budget doesn’t allow a full-house order, we can phase it, but the written price will show you exactly what the phasing costs.
Can you install custom windows and doors in Orlando the same week?
Standard-size impact windows from stock in Orlando can usually be installed within 5-10 business days of order. Custom-sized or architectural-shape units run 3-6 weeks for manufacturing, and full-frame replacements with interior trim work add 1-2 days on site. Penhallow Remodeling Orlando gives you a defined arrival window before any work starts, not a vague “sometime next week” promise. A live person answers our phones 24/7 if you want to check current lead times: (850) 427-6454.
How much does it cost to replace a sliding glass door in Orlando?
Replacing a sliding glass door in Orlando typically runs $4,000 to $12,000 for an impact-rated, code-compliant unit. Lower-end numbers cover standard 6-foot vinyl sliders with basic glass. Multi-panel or multi-slide configurations, common in lakefront homes on Conway and in newer Windermere builds, push past $10,000 with glass and hardware upgrades. This price includes demolition, new threshold flashing, interior trim, and disposal.
Do custom windows and doors require a permit in Orlando?
Yes. Window and door replacement in Orange County requires a building permit, and exterior openings require Florida Product Approval documentation for wind-borne debris compliance. Permit fees typically run $150 to $500 depending on the number of openings and the jurisdiction. Penhallow Remodeling Orlando handles the permit application, product approval submittal, and inspection scheduling as part of every written quote, so the price you see includes it.
Pricing reflects the Orlando market as of 2026. Penhallow Remodeling Orlando offers free estimates – call (850) 427-6454.
Written by Trevor Nash, Owner at Penhallow Remodeling Orlando, serving Orlando and Orange County with written pricing and the 365-Day Done Right Promise on every project.
What Our Customers Say
"Gutted and redid the master bath. They gave me a schedule and actually stuck to it. Any time there was a choice to make they called me instead of guessing. Love the result."
- Kayla Benton"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn"Full kitchen down to the studs. The written estimate held and they finished on the day they promised. Crew was tidy and polite the whole month. Rare to find."
- Vernon Askew
